Tricks Tipps TUF A15 A17 FA506 FA706

Discussion in 'Asus' started by mirt81, Oct 18, 2020.

  1. mirt81

    mirt81 Notebook Guru

    Reputations:
    11
    Messages:
    55
    Likes Received:
    10
    Trophy Points:
    16
    Determination Bios v309 are @ 23.11.2o2o most recommendable:

    Example Reason v311 & v313 have reduced USB Power Values so after searching WWW i know why USB Dongle lossing connectivity :-(


    Standard Windows 10 power options:

    upload_2020-10-18_18-20-15.jpeg

    Minimum processor performance
    5%
    Maximum performance state of the processor
    99% = 1.7 Ghz - 4.2 Ghz slider taskbar middle or right
    100% = 4.2 Ghz slider taskbar middle and right

    Performance increase mode for processors (only visible after registry tweak)
    High

    upload_2020-10-18_18-21-34.jpeg upload_2020-10-18_18-21-42.jpeg

    Adapted Windows 10 energy options:

    upload_2020-10-18_18-22-6.jpeg

    Registration change:

    Windows Registry Editor Version 5.00


    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\54533251-82be-4824-96c1-47b60b740d00\be337238-0d82-4146-a960-4f3749d470c7]
    "Attributes"=dword:00000002


    Minimum processor performance
    5%
    Maximum performance state of the processor
    99% = 1.7 Ghz slider taskbar middle and right
    100% = 2.9 Ghz slider taskbar middle and right
    Performance enhancement mode for processors
    Deactivated

    upload_2020-10-18_18-22-41.jpeg

    Legacy drivers and DCH drivers:

    Install Legacy Drivers Only or DCH Drivers Only!

    Radeon Control UWP can only be installed via the web link on the Asus driver webpage after the following forwarding to the Microsoft Store.

    At the moment the Realtek Audio driver is only available as a DCH version (in my case I had to find out that installing legacy drivers and the Realtek Audio DCH driver leads to extended boot times: in just 3 minutes :)

    PS: Stable working Drivers so far


    0009-64bit_Win7_Win8_Win81_Win10_R282 Realtek HD Audio


    Fan starts to snort rather no bearing damage than the fact of the material expansion or PWM control AmaoryCrateService . . . yeah great tinkering announced ?

    Maybe someone will find other problems and their solutions.
     
    Last edited: Dec 11, 2020
  2. Shaden

    Shaden Notebook Deity

    Reputations:
    827
    Messages:
    1,334
    Likes Received:
    7
    Trophy Points:
    56

    This just added the option of Processor Performance boost mode ... and allowed me to select Aggressive. My 4800h is running at 4.2+Ghz pretty much constantly now.
     
  3. mirt81

    mirt81 Notebook Guru

    Reputations:
    11
    Messages:
    55
    Likes Received:
    10
    Trophy Points:
    16
    Found RyzenAdjust which works similar to Throttlestop but via CMD (also no Installation only execute).

    https://github.com/FlyGoat/RyzenAdj

    https://github.com/FlyGoat/RyzenAdj/releases following ryzenadj-win64-release.zip Download and copy the files contained into a folder, e.g. RyzenAdj, then copy this folder e.g. to C: \ Programs.

    The included file demo.bat can be edited with Notepad. . .

    For me the content looks like this:

    %~dp0\ryzenadj.exe --tctl-temp=75 --vrmmax-current=75000

    Tweaked Ugine Run

    upload_2020-11-11_20-59-24.png
    CPU 4300MHZ - Max Temp & Noise @ 75 C° GPU 73 C° less Fan Speed

    The standard values for an Asus Ryzen 4800h in the Tuf A15 FA506IV can be validated with the HwInfo tool in the CPU tab (changed values are maybe not displayed )

    upload_2020-11-4_18-18-20.jpeg

    Ungine stock Values

    upload_2020-11-11_20-59-3.png
    CPU 4300MHZ - Max Temp & Noise @ 90 C° GPU 71 C° more Fan Speed

    %~dp0\ryzenadj.exe --tctl-temp=95 --vrmmax-current=96000

    It have to researched the meaning of the values, but here is a table for orientation. Do not understand the values themselves sometimes crap happens ;-)

    --tctl-temp=95 | Temp Limit = Clockspeed Depending on Temperature . . . ? i Range 75 - 95 mayBe
    --stapm-limit=45000 | STAPM TDP = Watt ?
    --fast-limit=54000 | Long Boost TDP = Watt ?
    --stapm-time=900 | Long Boost Duration = Seconds . . . ?
    --slow-limit=60000 | Shorts Boost TDP = Watt . . . ?
    --slow-time=60 | Short Boost Duration= Seconds . . . ?
    --vrmmax-current=96000 | VRM Current (A) = Ampere / EDC . . . ? Real Noise Blocker Range 75 - 96 mayBe


    In Thesis some Values would work together with others so for Example:

    --tctl-temp=85 --vrmmax-current=86000 together

    --stapm-limit=45000 only as single Value Entry ( does set fast-limit & slow-limit @ 45000 Value ? )

    --fast-limit=54000 --slow-limit=60000 together but values will revert to stock over short time !

    A link to demo.bat, for example: create on the desktop and run. . . if necessary as an administrator.

    Ideally, let the demo.bat start via the autostart function when logging in after starting the computer or, if given, manually
    .
     
    Last edited: Jan 15, 2021 at 7:12 PM
  4. mirt81

    mirt81 Notebook Guru

    Reputations:
    11
    Messages:
    55
    Likes Received:
    10
    Trophy Points:
    16
    Also using MSI Afterburner to make an Performance-Curve Profil have Performance Boost and Power Improvment ( Secret Key Combo CTRG Left + F open Curve Window / CTRG Left + D resets to Default GPU Settings and also Shift-Key has Function ) :) . . . afer doing things in Right Table Window they are to ably in regeular MSI-Afterburner Window Left

    Important River Tuner has also to be Installed most Includet in MSI Afterburner Install package but is to Uncheck or Check . . . if not Download Riva Tuner Seperat ! i !

    Example: Noise Block

    Stock Curve . . . Chose Quader by left mouse button press so that will be the new GPU Frequence

    upload_2020-11-14_0-49-43.jpeg
    Point mouse coursor lite behind marked quader press and hold left shift keyboard key press left mouse button hold and move mouse cursor to the right so present part behind will be marked
    upload_2020-11-14_0-50-14.jpeg
    Release left shift and mouse button and move cursor to first market then move down so all other entries move down under the chosen quader that will the new GPU Frequence
    upload_2020-11-14_0-50-52.jpeg
    chouse again new GPU Frequence quader and move upward
    upload_2020-11-14_0-51-24.jpeg

    Apply in MSI Afterburner main GUI
    upload_2020-11-14_3-2-38.jpeg

    Pictures are Examples mayBe 1560MHZ @ 0.725v or 1650MHZ @ 0.750v Stable values .
     
    Last edited: Dec 10, 2020

Share This Page