1. You may have noticed things look a little different around here - we've switched to a new platform (XenForo) and have some new forum styles and features. This how-to guide will help you find your way around. If you find anything that looks strange, post it in this thread.

Thunderbolt e-gpu setup with Sonnet Echo Express Pro review (Tomshardware)

Discussion in 'e-GPU (External Graphics) Discussion' started by Gordon1hd1, Sep 18, 2012.

  1. EpicBlob

    EpicBlob Notebook Evangelist

    Reputations:
    49
    Joined:
    Jan 24, 2012
    Messages:
    410
    It looked like borealiss got his thunderbolt egpu working with the diy egpu setup and he was using a 2011 macbook.
     
  2. Teknotronix

    Teknotronix Notebook Guru

    Reputations:
    0
    Joined:
    Sep 25, 2012
    Messages:
    51
    OK so I bought the application and it seemed to install fine by running all 3 bat files it suggests in this article:

    http://forum.notebookreview.com/e-g...8851-diy-egpu-experiences-64.html#post6295529

    However when in menu mode, the application stops when I either disable the dGPU through it OR run the compaction. It's odd cos the cursor on the screen keep flashing but does not respond to any input. When running the compaction it stops on the following line:

    copy R:\config\pci.bat (ramdisk) -> c:\config\pcid.bat (drv) ...

    Anyone seen similar?
     
  3. muthma

    muthma Newbie

    Reputations:
    0
    Joined:
    Oct 13, 2012
    Messages:
    3
    Hi Guys - I am using the TH05 on a mid 2011 17'' MBP (the first one with thunderbolt). My aim is to get the eGPU working under OSX (10.8.2). I am using a GTX 580 3GB (PC version, not EFI flashed). The issue I have is that in system profiler when clicking on the PCI bus I get "can not read from card". CUDA-Z shows no CUDA cards, GPUSNIFFER shows only my internal cards.

    Do you know what I need to do?
     
  4. EpicBlob

    EpicBlob Notebook Evangelist

    Reputations:
    49
    Joined:
    Jan 24, 2012
    Messages:
    410
    Muthma,

    So far, no one has gotten an egpu to work with os x over thunderbolt. This is because the card is not "thunderbolt aware". It has only been proven to work under windows 7.


    Tekno,

    I'm not familiar with the diy setup. You might post on the diy egpu experiences forum?
     
  5. muthma

    muthma Newbie

    Reputations:
    0
    Joined:
    Oct 13, 2012
    Messages:
    3
    Thanks for coming back. It is interesting that the card is visible on the PCI bus. I think it has to do with the MBP not looking for any other cards than the internal ones when it boots.
     

    Attached Files:

  6. EpicBlob

    EpicBlob Notebook Evangelist

    Reputations:
    49
    Joined:
    Jan 24, 2012
    Messages:
    410
    Oh wow! Thats interesting. Have you downloaded the nvidia desktop drivers for mac? If you search for diy egpu mac experiences there should be instructions to get the drivers downloaded. You just have to edit the distribution.plist so itll install on your macbook. Good luck!
     
  7. muthma

    muthma Newbie

    Reputations:
    0
    Joined:
    Oct 13, 2012
    Messages:
    3
    Did that. Downloaded the nvidia drivers from their website and added my MacBook Pro and installed it. I saw that new kexts were installed as they went bcak to default. But still the same results. Also after I added the device ID again for the gtx 580 in the nvidia kexts. I feel I am close! I think the issue is that the MBP is not loading the kext for the GTX580 because it assumes no GPU other than the build in will be present. Maybe during the boot it does not look for anything. Not sure there is a way to force the kext to be loaded. I have attached what is loaded right now
     

    Attached Files:

  8. EpicBlob

    EpicBlob Notebook Evangelist

    Reputations:
    49
    Joined:
    Jan 24, 2012
    Messages:
    410
    I think it is the thunderbolt problem. Since it's connected through thunderbolt, it needs drivers so it can be detected through TB. So far, Apple hasn't allowed graphics cards to be viewed under os x without a ton of editing files. If you look on youtube and search MediaProsUK, they have gotten a NVidia quadro 4000 working on os x via thunderbolt; but they don't say how. All they said was it's something you shouldn't do (I really wish they could just put out a guide of how they did it).
     
  9. Hunter20

    Hunter20 Notebook Enthusiast

    Reputations:
    0
    Joined:
    Mar 6, 2012
    Messages:
    25
    Why would you use an egpu in osx? there not many games out on osx. Just install windows and enjoy your egpu:p
     
  10. EpicBlob

    EpicBlob Notebook Evangelist

    Reputations:
    49
    Joined:
    Jan 24, 2012
    Messages:
    410
    Its mostly for people who use 3D editing software. An os x compatible egpu could essentially wipe out most mac pro purchases.

    But yes, windows does seem like the main os for e-gpus :)
     
Similar Threads: Thunderbolt e-gpu
Forum Title Date
e-GPU (External Graphics) Discussion Alienware external graphics amplifier, thunderbolt solution? Jan 2, 2015
e-GPU (External Graphics) Discussion Expresscard 54 vs Thunderbolt Sep 19, 2014
e-GPU (External Graphics) Discussion eGPU with Apple thunderbolt display Nov 12, 2013
e-GPU (External Graphics) Discussion Searching for an th05 thunderbolt adapter Jun 12, 2013
e-GPU (External Graphics) Discussion Silverstone T004 : External Thunderbolt GPU Jun 8, 2013

Share This Page