1. You may have noticed things look a little different around here - we've switched to a new platform (XenForo) and have some new forum styles and features. This how-to guide will help you find your way around. If you find anything that looks strange, post it in this thread.

The NEW G73JW-3DE, INFO, Specs, and Pre-Ordering Available!

Discussion in 'ASUS Gaming Notebook Forum' started by -=$tR|k3r=-, Nov 1, 2010.

Thread Status:
Not open for further replies.
  1. nathancnc

    nathancnc Notebook Guru

    Reputations:
    0
    Joined:
    Oct 28, 2010
    Messages:
    71
    I have done this..... in fact the drivers I was using in the first place were also the latest from nvidia. I don't understand this.....

    I also checked, and while messenger is running my gpu temps go up to 51 degrees!!!!
     
  2. sylphyaj

    sylphyaj Notebook Enthusiast

    Reputations:
    0
    Joined:
    Dec 24, 2010
    Messages:
    37
    I saw that by updating the 460M driver 3D vision was also install. Do I have to download the 3D driver and install them manually too?
     
  3. nathancnc

    nathancnc Notebook Guru

    Reputations:
    0
    Joined:
    Oct 28, 2010
    Messages:
    71
  4. cylence

    cylence Newbie

    Reputations:
    0
    Joined:
    Feb 19, 2011
    Messages:
    7

    Not working for me ;(

    Do i have to upgrade to sd23 1st or can i use this for 22 to 24?

    tried it 100+ times now but it just doesnt do anything after i enter the command i stay in this Screen

    any solutions?
     
  5. nathancnc

    nathancnc Notebook Guru

    Reputations:
    0
    Joined:
    Oct 28, 2010
    Messages:
    71
    I upgraded both drived from SD22 to SD24...it worked perfect.
     
  6. Chastity

    Chastity Company Representative

    Reputations:
    1,144
    Joined:
    Jan 19, 2009
    Messages:
    5,859
    Here's an easier way... go into the BIOS, and put the SATA controller into IDE Mode from AHCI Mode. Then boot from the flash CD, and run the firmware updates. When done, reboot, and go back into the BIOS and put it back to AHCI Mode.
     
  7. sylphyaj

    sylphyaj Notebook Enthusiast

    Reputations:
    0
    Joined:
    Dec 24, 2010
    Messages:
    37
    For people who use MSI afterburner to overclock, what are your settings? I don't want to over do mine. I just learn how to use it and my settings are

    Core clock 800
    Shader Clock 1600
    memory clock 1450
     
  8. Pdx-1.1

    Pdx-1.1 Notebook Enthusiast

    Reputations:
    4
    Joined:
    Apr 22, 2010
    Messages:
    20
    I have the same problem and screen. I tried to change for IDE but didnt work.
     
  9. ObelixtheGreat

    ObelixtheGreat Notebook Enthusiast

    Reputations:
    0
    Joined:
    Feb 12, 2011
    Messages:
    10
    This, at least, worked for me. (Thanks to Mindtilt).

    - Download the latest nvidia drivers (260.99).
    - Extract to the C:Nvidia folder.
    - Copy the attached nvam.inf file.
    - Go to C:Nvidia/Display Driver/260.99/Vista 64-bit/International/Display.Driver, Paste and overwrite the existing file.
    - Run the setup from the International folder.
    - Enjoy the new Drivers

    I didnt remove the old Drivers. But if you want to do so, do it with driver sweeper and everything should be fine.

    There is a "S" to much in your line try anqsd instead of ansqsd. It Should work.
     

    Attached Files:

  10. Pdx-1.1

    Pdx-1.1 Notebook Enthusiast

    Reputations:
    4
    Joined:
    Apr 22, 2010
    Messages:
    20
    Thx for the NVidea tip!

    In the case of upgrading the HD, I tried without the "s", but not working yet, same screen.

    I have the 500 gb version.
     
Thread Status:
Not open for further replies.

Share This Page