The hopeful of keeping MXM 3.0b alive thread!

Discussion in 'Gaming (Software and Graphics Cards)' started by King of Interns, Aug 17, 2016.

  1. Mastermind5200

    Mastermind5200 Notebook Virtuoso

    Reputations:
    364
    Messages:
    2,104
    Likes Received:
    808
    Trophy Points:
    131
    Flux and a lot of love and heat
     
  2. TheQuentincc

    TheQuentincc Notebook Evangelist

    Reputations:
    38
    Messages:
    393
    Likes Received:
    107
    Trophy Points:
    56
    For those who are interested to organize their mxm card collection, there is a 3D design I made for regular 82mm width card
    IMG_20200331_155330.jpg
    There is two tray of 5 slot each :)
     

    Attached Files:

  3. RMSMajestic

    RMSMajestic Notebook Consultant

    Reputations:
    94
    Messages:
    239
    Likes Received:
    197
    Trophy Points:
    56
    I think you are showing off :)
    And where can I buy this?
     
  4. Khenglish

    Khenglish Notebook Deity

    Reputations:
    674
    Messages:
    943
    Likes Received:
    791
    Trophy Points:
    106
    It looks like from front to back the cards are 9600m, 1080, 680m, 5870m, 680m, 680m, 980m, 680m, 580m? Impressive collection. I'm guessing you tried to save them all at some point?
     
    long2905, Costen and Ashtrix like this.
  5. TheQuentincc

    TheQuentincc Notebook Evangelist

    Reputations:
    38
    Messages:
    393
    Likes Received:
    107
    Trophy Points:
    56
    It's a 3D printed thing, so you need to find someone or a service that can print it for you, card are pretty loose in it but it doesn't bother me

    I don't think I have to much, compared to desktop card (atm I have nearly 10 desktop card sitting only on my desk...), in the picture there is from front to back :

    - HP Quadro P600 (from desktop workstation, might work, never tested in "know working" laptop)
    - Zotac GTX1080 (same issue as the P600 + fixed memory lane)
    - Dell GTX880M (I think it has some issue of stability, can't OC more than 50MHz, seems strange to me)
    - Dell Firepro M6100 (stock M6800 card)
    - MSI GTX780M (not working)
    - MSI GTX675MX (I believe, not working)
    - MSI GTX980M 4GB (shorted/burned pcb at the mxm, easy fix but I need to dig a little bit into the pcb to clear this)
    - Dell Quadro K4000M (stock M6700 card)
    - R9 M290X (not working)

    Not on the picture are :
    - GTX980M 8GB waiting for 980 core
    - Quadro P4000 in my M6700
    - MSI GTX570M in my GT70
    - GTX880M with memory shorted I think.

    As you can see most are not working and the few working are from upgraded/dead laptop, most Kepler will be used as test subject for swaping core, Maxwell card will be upgraded to 970 or 980 core.

    Buying dead card isn't really expensive, all the card on the picture cost me less than 200€, Zotac 1080 included (traded for a fixed 970M bought for cheap). I like to buy cheap and dead to fix it, even if I don't need it, I always say it's for hwbot but benching graphics card with an old 6 core ivy bridge doesn't make high score even with high clock/volt so that's not really worth it :/
     
    Last edited: Apr 11, 2020
    triturbo and CaerCadarn like this.
  6. valec06

    valec06 Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    Hello,

    I have upgrade my M15x from 260m to M6100 MXM and brightness setting is not working ... is it normal ?

    Thanks
     
  7. Mastermind5200

    Mastermind5200 Notebook Virtuoso

    Reputations:
    364
    Messages:
    2,104
    Likes Received:
    808
    Trophy Points:
    131
  8. Khenglish

    Khenglish Notebook Deity

    Reputations:
    674
    Messages:
    943
    Likes Received:
    791
    Trophy Points:
    106
    RTX 2060 power modded to 135W (1 mOhm shunts piggy backed on top of existing 0.5mOhm shunts) in P150EM modded for direct eDP output:

    3dm11: https://www.3dmark.com/3dm11/13810880
    fs: https://www.3dmark.com/3dm/46053580
    fsu: https://www.3dmark.com/3dm/46053890

    Clevo 20 series power delivery is NOT as good as 10 series. The card is struggling on 4 of 8 core phases with the power mod (2060 pcb only has 4 phases while the 2080 has 8). A 1080 with half of its core phases would be a FET modded 980m, which I pulled up to 270W with no problem. Also the MXM power tab is completely unused on 20 series boards, which is astounding considering how much power loss the power cable has without the MXM tab doing anything. That's 8 amps going through those 4 small wires for a regular 2080.

    The plan is to try to get the parts to add the missing power phases and memory. If anyone can source any dead boards I can salvage I would appreciate it.
     
    bennyg, dzpliu, kothletino and 7 others like this.
  9. Semmy

    Semmy Notebook Consultant

    Reputations:
    24
    Messages:
    146
    Likes Received:
    113
    Trophy Points:
    56
    Hello. Please tell me, can this v-card ( RTX 5000 ) be launched on the Eurocom Tornado F5, with modifications mounts and cooling ?
     
  10. mr007rm

    mr007rm Notebook Enthusiast

    Reputations:
    0
    Messages:
    33
    Likes Received:
    8
    Trophy Points:
    16
    I have a plan.
    MSI GT70, i7-4940MX, 32GB DDR3 1600Mhz, 2TB SSD + 4TB HDD ....... Quadro P5200

    You just need a Max-Q vbios to add it. Does anyone have one? I would pay for it!

    Does anyone know this? 86.04.8B.00.7A (MSI).... is already on its way. Ebay shopping.
    So far (green 115W) I have used Eurocom 1070. He's dead, I'll switch now.

    Will I have a picture? Because there is Optimus, unlocked bios.(LVDS,eDP)
     
    Txordi likes this.

Share This Page