Take Full Control of your Razer Blade w/no PL Throttling

I am having this exact same issue (Razer Blade Stealth GTX 1650). I open AFUWINGUI v.5.13.00.05, click Save. It appears to export correctly. I then open the .rom file using AMIBCP v 5.02.0023, change only the 7 total flags to USER (5 in one screenshot, 1 on both of the others), then click save. I then open the saved file in AFUWINGUI, click Flash, ensure only Main BIOS is checked and go, and it immediately gives the same "State: Failed" "Address: 0xFFFFFFFF."

Here's a link to the modded .rom file:

https://drive.google.com/file/d/1cNuiRvIjCR5pBYxA0ta0WY8P56RWFg6_/view?usp=sharing

 

BIOS is locked, you have to flash it with programmer.

 

del

 

Is there a reason my BIOS would be locked while others aren't? Is it because I updated it or something? And a physical programmer is the only way around this? That sounds much riskier than the software update method...

 

Actually it is safer, because you can return old one even after bricking your device. What do you think they do in service when have such case

 

I am having such a question. My Blade 2020 with moded BIOS can not undervolt. What I mean to finish TS bench with 6094 I can have -30 for core and -30 cache that's it. For cinebench I can go -100, -100. So TS bench is using AVX or smth? Or just do some dark voodoo tu ensure stable undervolt like small FFT from PrimePI?

 

Does someone got a working undervolt for his Blade 2020 Base Model? I get everytime an bluescreen

 

del

 

I got an working undervolt with -0.080V after an ME Update

 

Hi everybody, its my first Post.

are there instructions on the Internet specifically for the Razer models? or some kind of general guide to it? I've already seen a few Videos but was unsure which procedure is the right one. is it that "CH341A" chip?

Its a Shame that razor locked It.