Synapse Fan Control

Hello Guys.

I'm new here in the forum and just wanted to ask if someone knows if you can do something in Synapse?

1. Would like to change my fan curve!
2. Has anyone already done that?
3. Does anyone know what to change and where to design them yourself?

Thanks for the information in advance

LG

 

You can not change curve. You can change only target speed.

 

Hello.

Thank you for your answer.
Yes, I know that but "and that is the question":
1. I would like to adjust the fan curve or
2. lower the manual 2300rpm to 1500

I just don't know whether it is controlled via Synapse or via the BIOS ......?
But rather I think it is done via Synapse! Maybe synapse can be rewritten - programmed

 

It is controlled by one controller which is closed source. Synapse just gives command but it is static control no curve. I have made reverse engineering to write linux application to control Razer laptops. That's why I am sure that there is no way directly.

 

Thank you for your answer. A friend of mine is a programmer and he has a lot of specialist knowledge.
1. Is it generally not possible?
2. not even with a bios programmer?
3. Do you know where to look or where that is anchored in?

Have you got a RazorBlade yet ?

 

Fan is controlled by embedded controller, not BIOS, and we have no way of changing the fan tables there.

 

Thank you for the answer...... that is Not good.....
I Have hoped, there is a way.....

Does it give a Notebook, who is same as the Razor Blade with Full Fan Control.

My Neighbor has a TongFang..... In Office the Fan Have no noise and you can change the Fan Curve Manuel.

 

Msi and gigabyte have such function

 

Thank for answer .....

1. Have you yet an Razer Blade 17 ?
2. If Yes, which BIOS do you have ?
3. And Du have the New EC Controller Update installed ?

• Do you have experiences with an MSI or Gigabyte in 17 inches?

 

I am with Blade Studio 2020. Latest moded BIOS and latest EC. 64 GB 3200 HyperX