Screen Upgrade on Sager NP5855 (Clevo N855HJ)

Discussion in 'Sager and Clevo' started by Datamonger, Oct 2, 2018.

  1. Datamonger

    Datamonger Notebook Evangelist

    Reputations:
    1,587
    Messages:
    661
    Likes Received:
    621
    Trophy Points:
    106
    I've found a 120Hz panel that's intended for use with the Clevo N855EK1. What I'd like to know is will this screen work with the N855HJ? Does anybody have any input to offer on this? Thank you in advance.
     
  2. Meaker@Sager

    Meaker@Sager Company Representative

    Reputations:
    8,010
    Messages:
    50,623
    Likes Received:
    14,341
    Trophy Points:
    931
    If the connection is the same (30 pin edp for example) it would be fine. Check the data sheets. Hwinfo or the hardware ID in device manager to check your current panel.
     
  3. Support.3@XOTIC PC

    Support.3@XOTIC PC Company Representative

    Reputations:
    1,261
    Messages:
    7,114
    Likes Received:
    954
    Trophy Points:
    281
    There's some displays listed in the sheets for both that are the same, so there's a good chance anything that will work in one will work in the other.
     
  4. Meaker@Sager

    Meaker@Sager Company Representative

    Reputations:
    8,010
    Messages:
    50,623
    Likes Received:
    14,341
    Trophy Points:
    931
    Worth checking the connector and electrically you will be fine.
     
  5. Datamonger

    Datamonger Notebook Evangelist

    Reputations:
    1,587
    Messages:
    661
    Likes Received:
    621
    Trophy Points:
    106
    The Clevo N855HJ apparently uses the same 30-pin connector as the N855EK1, so I guess everything should just be a drop-in upgrade.
     
  6. Meaker@Sager

    Meaker@Sager Company Representative

    Reputations:
    8,010
    Messages:
    50,623
    Likes Received:
    14,341
    Trophy Points:
    931
    Electrically you should be good to go, physically I don't think there were changes.
     
Loading...

Share This Page