Official Coffee Lake Refresh Thread/BIOS for ALL Clevo Laptops - RTX CARDS NOW SUPPORTED

Discussion in 'Sager and Clevo' started by DaMafiaGamer, Oct 25, 2018.

  1. Shreyas Shetty

    Shreyas Shetty Notebook Enthusiast

    Reputations:
    5
    Messages:
    37
    Likes Received:
    9
    Trophy Points:
    16
    I got an error code while flashing the GPU Vbios - Error Code - 0x005A
     
  2. joluke

    joluke Notebook Deity

    Reputations:
    476
    Messages:
    1,253
    Likes Received:
    650
    Trophy Points:
    131
    Need a spi programmer then
    And for the BIOS too
     
    Shreyas Shetty likes this.
  3. Shreyas Shetty

    Shreyas Shetty Notebook Enthusiast

    Reputations:
    5
    Messages:
    37
    Likes Received:
    9
    Trophy Points:
    16
    spi programmer for both the motherboard bios and/or just the GPU?
     
    Last edited: Dec 7, 2019
  4. philstopford

    philstopford Notebook Consultant

    Reputations:
    12
    Messages:
    138
    Likes Received:
    38
    Trophy Points:
    41
    Quite right - sorry; somehow overlooked that column
     
    joluke likes this.
  5. Shreyas Shetty

    Shreyas Shetty Notebook Enthusiast

    Reputations:
    5
    Messages:
    37
    Likes Received:
    9
    Trophy Points:
    16
    I was trying to update it with wrong file, i tried it with the "non g-sync non-sli .rom" file, but then i tried it with the "g-sync non-sli .rom" file and it worked perfect. It updated successfully. It just asked me for an extra step in the command file to overwrite press y... and then it updated successfully.
     
    joluke likes this.
  6. joluke

    joluke Notebook Deity

    Reputations:
    476
    Messages:
    1,253
    Likes Received:
    650
    Trophy Points:
    131
    Glad to know
     
    Shreyas Shetty likes this.
  7. Shreyas Shetty

    Shreyas Shetty Notebook Enthusiast

    Reputations:
    5
    Messages:
    37
    Likes Received:
    9
    Trophy Points:
    16
    One weird thing that i noticed is that, using msi after burner or the asus GPU tool, i usually got a 250 mhz OC on the clock speed and a 150 on memory clock. But after this update, its no more stable and it crashes i had to reduce it down to 150 and 100 respectively. I cant figure out what that's about.
     
    joluke likes this.
  8. cirdec29

    cirdec29 Newbie

    Reputations:
    0
    Messages:
    4
    Likes Received:
    2
    Trophy Points:
    5
    Hello here are some results with my clevo p870 dm3g
    [​IMG]
     
    Last edited: Dec 8, 2019
    joluke and Papusan like this.
  9. joluke

    joluke Notebook Deity

    Reputations:
    476
    Messages:
    1,253
    Likes Received:
    650
    Trophy Points:
    131
    A couple of questions regarding this BIOS:

    I'm running 1.07.26 TM1 BIOS modded for DM3.

    Noticed in this file: https://yadi.sk/d/95fFmP1yLhRRjw

    there is a new vBios with new GOP 3x000F

    I'm running this GOP:
    upload_2019-12-9_23-10-6.png

    According to @dsanke i would only need to flash the BIOS 1.07.27 without battery and pull the AC power cord in the end and wait 30 seconds and plug it back and i'd be back on track.

    Do i need to update the vBios?

    I'm running 1.07.26 with the GOP in the image above without any issues.

    Thanks
     
  10. Tryner

    Tryner Notebook Consultant

    Reputations:
    8
    Messages:
    119
    Likes Received:
    78
    Trophy Points:
    41
    Use this methode for flash but the 1.07.27 have many bugs the last stable version is 1.07.26


    How to flash : - Plug AC PSU , Enter BIOS , Change 2 values . - Setup->Boot->UEFI Settings->UEFI Boot->Enabled - Setup->Security->Secure Boot->Disabled ( If you can not find this then you don't need change it . ) - Unplug all your SSD and HDD - Put EFI folder to your FAT32 USB Flash Disk , put bios file to EFI/Boot folder , and boot to it - Wait for startup.nsh executes, and then type "meset", press enter. - Device will auto reboot and the fan will work at high speed , then boot to USB Flash Disk again. - Wait for startup.nsh executes, and then type "fpt -d backup.bin" , press enter , to backup . - And type "fpt -f BIOS.bin -rewrite -y" , press enter , to flash new bios . - Type "fpt -greset" press enter , to let ME and BIOS initialization . - If you can not done this ( keep receiving FPT Error message ), try SPI programmer , make sure backup before you flash . - If you can not get screen resume working , it just keep black screen , then you need use SPI programmer reflash your BIOS chip .
     
Loading...

Share This Page