1. You may have noticed things look a little different around here - we've switched to a new platform (XenForo) and have some new forum styles and features. This how-to guide will help you find your way around. If you find anything that looks strange, post it in this thread.

Installing Fedora 7 on Dell 1520

Discussion in 'Dell' started by thinkblink, Aug 7, 2007.

Thread Status:
Not open for further replies.
  1. thinkblink

    thinkblink Notebook Enthusiast

    Reputations:
    0
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    5
    Has anyone been successful. I tried to put the installation fc7 64bit CD and it is asking me for the DVD-ROM driver. I tried many of the options that I can choose from, but i am still unsuccessful. Any ideas?
     
  2. parus

    parus Newbie

    Reputations:
    0
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    5
    You have to put the iso of the dvd on a fat32-partitition and then you can choose for hard disk as source of your installation files
     
  3. TuxDude

    TuxDude Notebook Deity

    Reputations:
    255
    Messages:
    909
    Likes Received:
    0
    Trophy Points:
    30
    Did you try the 32-bit version of FC 7 ?
     
  4. rsandu

    rsandu Notebook Enthusiast

    Reputations:
    0
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    5
    Hello all,

    I own a shiny new Dell Inspiron 1520 (good laptop, solid !) and I'm trying to install Fedora on it (using as little non-Fedora software as possible). Most of the following information applies to Red Hat Enterprise Linux or CentOS, as well.

    For those interested, I'll list my review, in order to share information with community:


    Here is a list of Inspiron's "special" devices, with their description as reported by Windows XP's Device Manager:

    - Integrated Bluetooth adapter
    Dell Wireless 355 Module with Bluetooth 2.0 + EDR Technology

    - DVD writer
    Pioneer DVD+-RW DR-K17Y

    - integrated webcam
    Laptop integrated webcam

    - integrated modem
    Conexant HDA D330 MDC v.92 modem

    - integrated Ethernet adapter
    Broadcom 440x 10/100 integrated controller

    - integrated wireless adapter
    Mini board WLAN Dell Wireless 1390

    - video adapter
    NVIDIA GEForce 8400M GS

    - integrated card reader
    Ricoh xD-Picture card Controller

    - FireWire connector
    Firewire OHCI-compliant IEEE 1394 Controller


    First of all, please use the Fedora 8 test 3 x86_64 DVD, not Fedora 7. With F8, installation works out of the box, in full graphical mode.

    Touchpad ("integrated mouse") works by default. DVD writer works OK.

    After applying all software updates (via yum), as of October 11, 2007, you will notice that the Bluetooth adapter works out of the box, too.

    Anyone on this list can please point me to some information for setting up:

    - integrated wireless adapter;
    - integrated webcam;
    - modem;
    - FireWire port (I didn't tested it, have no FireWire device);
    - card reader (I didn't tested it, have no card);

    I'll add other information as soon I'll get it.


    Regards and thanks,
    Răzvan
     
  5. rsandu

    rsandu Notebook Enthusiast

    Reputations:
    0
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    5
  6. rsandu

    rsandu Notebook Enthusiast

    Reputations:
    0
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    5
  7. rsandu

    rsandu Notebook Enthusiast

    Reputations:
    0
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    5
    Hello,

    For Linux developers, here is the full output of /sbin/lspci -vv for the Dell Inspiron 1520:

    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
    Latency: 0
    Capabilities: [e0] Vendor Specific Information

    00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000d000-0000dfff
    Memory behind bridge: fa000000-feafffff
    Prefetchable memory behind bridge: 00000000f4000000-00000000f7ffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
    Capabilities: [88] Subsystem: Dell Unknown device 01f1
    Capabilities: [80] Power Management version 3
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
    Address: fee0300c Data: 4161
    Capabilities: [a0] Express Root Port (Slot+) IRQ 0
    Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s <64ns, L1 <1us
    Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 2
    Link: Latency L0s <256ns, L1 <4us
    Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
    Link: Speed 2.5Gb/s, Width x16
    Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise-
    Slot: Number 1, PowerLimit 75.000000
    Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
    Slot: AttnInd Off, PwrInd On, Power-
    Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [100] Virtual Channel
    Capabilities: [140] Unknown (5)
    00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin A routed to IRQ 20
    Region 4: I/O ports at 6f20

    00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin B routed to IRQ 21
    Region 4: I/O ports at 6f00

    00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin C routed to IRQ 22
    Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port

    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 21
    Region 0: Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
    Address: 0000000000000000 Data: 0000
    Capabilities: [70] Express Unknown type IRQ 0
    Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s unlimited, L1 unlimited
    Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
    Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
    Link: Latency L0s <64ns, L1 <1us
    Link: ASPM Disabled CommClk- ExtSynch-
    Link: Speed unknown, Width x0
    Capabilities: [100] Virtual Channel
    Capabilities: [130] Unknown (5)

    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s unlimited, L1 unlimited
    Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
    Link: Latency L0s <1us, L1 <4us
    Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
    Link: Speed 2.5Gb/s, Width x0
    Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
    Slot: Number 2, PowerLimit 6.500000
    Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
    Slot: AttnInd Unknown, PwrInd Unknown, Power-
    Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
    Address: fee0300c Data: 4169
    Capabilities: [90] Subsystem: Dell Unknown device 01f1
    Capabilities: [a0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100] Virtual Channel
    Capabilities: [180] Unknown (5)

    00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
    Memory behind bridge: f9f00000-f9ffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s unlimited, L1 unlimited
    Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
    Link: Latency L0s <256ns, L1 <4us
    Link: ASPM L0s Enabled RCB 64 bytes CommClk+ ExtSynch-
    Link: Speed 2.5Gb/s, Width x1
    Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
    Slot: Number 3, PowerLimit 6.500000
    Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
    Slot: AttnInd Unknown, PwrInd Unknown, Power-
    Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
    Address: fee0300c Data: 4171
    Capabilities: [90] Subsystem: Dell Unknown device 01f1
    Capabilities: [a0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100] Virtual Channel
    Capabilities: [180] Unknown (5)

    00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0
    I/O behind bridge: 0000c000-0000cfff
    Memory behind bridge: f9c00000-f9efffff
    Prefetchable memory behind bridge: 00000000f8000000-00000000f81fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    Device: Latency L0s unlimited, L1 unlimited
    Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4
    Link: Latency L0s <1us, L1 <4us
    Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
    Link: Speed 2.5Gb/s, Width x0
    Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
    Slot: Number 5, PowerLimit 6.500000
    Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
    Slot: AttnInd Unknown, PwrInd Unknown, Power-
    Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
    Address: fee0300c Data: 4179
    Capabilities: [90] Subsystem: Dell Unknown device 01f1
    Capabilities: [a0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100] Virtual Channel
    Capabilities: [180] Unknown (5)

    00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin A routed to IRQ 20
    Region 4: I/O ports at 6f80

    00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin B routed to IRQ 21
    Region 4: I/O ports at 6f60

    00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin C routed to IRQ 22
    Region 4: I/O ports at 6f40

    00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port

    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) (prog-if 01 [Subtractive decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
    Memory behind bridge: f9b00000-f9bfffff
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [50] Subsystem: Dell Unknown device 01f1

    00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02)
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Capabilities: [e0] Vendor Specific Information

    00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 0: I/O ports at 01f0
    Region 1: I/O ports at 03f4
    Region 2: I/O ports at 0170
    Region 3: I/O ports at 0374
    Region 4: I/O ports at 6fa0

    00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin B routed to IRQ 17
    Region 0: I/O ports at 6eb0
    Region 1: I/O ports at 6eb8
    Region 2: I/O ports at 6ec0
    Region 3: I/O ports at 6ec8
    Region 4: I/O ports at 6ee0
    Region 5: I/O ports at eff0
    Capabilities: [70] Power Management version 3
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin B routed to IRQ 17
    Region 0: Memory at febfbf00 (32-bit, non-prefetchable)
    Region 4: I/O ports at 10c0

    01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0427 (rev a1) (prog-if 00 [VGA])
    Subsystem: Dell Unknown device 01f1
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
    Region 1: Memory at f4000000 (64-bit, prefetchable) [size=64M]
    Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
    Region 5: I/O ports at df00
    Expansion ROM at fea00000 [disabled] [size=128K]
    Capabilities: [60] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
    Address: 0000000000000000 Data: 0000
    Capabilities: [78] Express Endpoint IRQ 0
    Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
    Device: Latency L0s <512ns, L1 <4us
    Device: AtnBtn- AtnInd- PwrInd-
    Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
    Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
    Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
    Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
    Link: Latency L0s <512ns, L1 <4us
    Link: ASPM L0s L1 Enabled RCB 128 bytes CommClk+ ExtSynch-
    Link: Speed 2.5Gb/s, Width x16
    Capabilities: [100] Virtual Channel
    Capabilities: [128] Power Budgeting
    Capabilities: [600] Unknown (11)

    03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64
    Interrupt: pin A routed to IRQ 17
    Region 0: Memory at f9bfe000 (32-bit, non-prefetchable) [size=8K]
    Capabilities: [40] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=2 PME-

    03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) (prog-if 10 [OHCI])
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 19
    Region 0: Memory at f9bfd800 (32-bit, non-prefetchable) [size=2K]
    Capabilities: [dc] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=2 PME+

    03:01.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) (prog-if 01)
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 18
    Region 0: Memory at f9bfd400 (32-bit, non-prefetchable)
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=2 PME-

    03:01.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 12)
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 4
    Region 0: Memory at f9bfd500 (32-bit, non-prefetchable) [size=256]
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=2 PME-

    03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 4
    Region 0: Memory at f9bfd600 (32-bit, non-prefetchable) [size=256]
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=2 PME-

    03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
    Subsystem: Dell Unknown device 01f1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 4
    Region 0: Memory at f9bfd700 (32-bit, non-prefetchable) [size=256]
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=2 PME-

    0c:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI (rev 01)
    Subsystem: Dell Unknown device 0007
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 17
    Region 0: Memory at f9ffc000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: [40] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=2 PME-
    Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
    Address: 00000000 Data: 0000
    Capabilities: [d0] Express Legacy Endpoint IRQ 0
    Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
    Device: Latency L0s <4us, L1 unlimited
    Device: AtnBtn- AtnInd- PwrInd-
    Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
    Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
    Link: Latency L0s <4us, L1 <64us
    Link: ASPM L0s Enabled RCB 64 bytes CommClk+ ExtSynch-
    Link: Speed 2.5Gb/s, Width x1
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [13c] Virtual Channel[/size][/size][/size]
     
  8. fimalik

    fimalik Newbie

    Reputations:
    0
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    5
    Hi i tried to install Redhat Linux (RHEL) on my dell Inspiron 1520 notebook. It has a 250GB SATA hard drive but when enter into the GUI mode of RHEL and proceed to partition either automatically or with Disk Druid, i get an error message which says that RHEL did not detect any drives to create partitions on. I tried to create a RAW partition and one with FAT32 but that did not work. I really want a multiple operating system on my notebook i.e Windows XP Pro and RHEL. Please could someone help me with installation of RHEL only on my Dell notebook which is not installing due to the above mentioned problem. Dell customer care said that they have never tested installing Linux on their systems and it might not work which i doubt. Thanks.
     
Similar Threads: Installing Fedora
Forum Title Date
Dell Reinstalling window7 Aug 9, 2011
Dell MediaDirect button doesn't work after installing VMware Mar 13, 2011
Dell Upgrading hard disk and clean installing Windows 7 Jan 11, 2011
Dell Installing MediaDirect AFTER Windows? Oct 11, 2009
Dell Installing Dell Win7 Upgrade on non-Dell PC Oct 3, 2009

Thread Status:
Not open for further replies.

Share This Page