Hp compaq nx 9020 dead

Discussion in 'HP & Compaq' started by crissandy, Mar 9, 2009.

Thread Status:
Not open for further replies.
  1. crissandy

    crissandy Newbie

    Reputations:
    0
    Joined:
    Mar 9, 2009
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    5
    Hi. I have a Hp compaq nx 9020 notebook. from the last week she is dead. The processor and ram,hdd are ok. The charching light and other lights are dead and the motherboard did not start up. Have any one a idee what can i do. I need a motherboard schematic because i have opened up the notebook and did not find any blowing pieces. I have downloaded the service manual for this model and the schematics are not in there. Please help me !!! :(
     
  2. jimbob83

    jimbob83 Notebook Evangelist

    Reputations:
    500
    Joined:
    Oct 6, 2007
    Messages:
    509
    Likes Received:
    0
    Trophy Points:
    30
    Make sure all the parts (RAM, HDD, mini PCI cards, modem cards, etc.) are properly seated or connected.

    Have you checked that the charger is working?

    Try starting with battery alone / charger alone in case the problem is one of these.

    Try removing the charger and battery, hold down the power button for half a minute or so, reconnect power and try starting again.

    If none of this works, your motherboard is probably fried and you're probably best off to buy a new laptop and sell your old one for parts on ebay.

    Unless you had some catastrophic failure, you won't find any blown up pieces on the motherboard. Most likely you've got a blown fuse so try checking all the fuses on the motherboard with an ohmmeter. A schematic would be handy but you could just examine the motherboard closely. You're looking for surface mount fuses, which look like tiny rectangular blocks about the size of a grain of rice.
     
  3. crissandy

    crissandy Newbie

    Reputations:
    0
    Joined:
    Mar 9, 2009
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    5
    All components are checked and tested the notebook motherboard must start without hdd and pci. But problem is from the motherboard it is not loading and no power up. The charger are new and i have tested it with mi multimeter. I have checked ale fuses and i have checked so any other pieces but I dont now what voltage must be in there so I need a motherboard schematics(PCB). When i have that schematic it is more easyer to check all pieces from the site with the power surce. Thanks for you answer and sorry for my ENGLISH
     
Similar Threads: compaq 9020
Forum Title Date
HP & Compaq Help with old laptop Compaq LTE 5380 Jul 12, 2014
HP & Compaq HP (Compaq) Houston testing lab tour articles Jul 5, 2014
HP & Compaq HP Compaq nx7300 with Windows 7? Nov 27, 2013
HP & Compaq which hard drive is best for Compaq 620 Nov 14, 2013
HP & Compaq Compaq presario 2500 ethernet controller driver ***FOUND**** Oct 13, 2013

Thread Status:
Not open for further replies.

Share This Page