How to reset BIOS Clevo P750DM2-G

Discussion in 'Sager and Clevo' started by shivam sah, May 17, 2019.

  1. shivam sah

    shivam sah Notebook Enthusiast

    Reputations:
    0
    Messages:
    15
    Likes Received:
    3
    Trophy Points:
    6
    I'm using Prema Mod BIOS and while trying to enable iGPU i ended up in a setting root port under GPU settings. and disabled it in hopes it'll force the iGPU and now i'm not getting any display.
     
  2. aziraphaleUK

    aziraphaleUK Notebook Consultant

    Reputations:
    14
    Messages:
    138
    Likes Received:
    73
    Trophy Points:
    41
    1) Hold down FN+D, and press the power button on
    2) Continue to hold the FN+D buttons for 20 seconds
    3) A blue box with information in it will appear on your screen, press enter and the system will reboot.
    4) Press F2 and go to bios, set the date and time.
    5) Then press F3 to load defaults, save and exit bios.

    Should do it
     
    Vasudev, Arrrrbol and joluke like this.
  3. Arrrrbol

    Arrrrbol Notebook Evangelist

    Reputations:
    2,381
    Messages:
    664
    Likes Received:
    903
    Trophy Points:
    106
    If FN+D doesn't work, remove the CMOS battery under the keyboard for 20-30 seconds
     
    Papusan and Vasudev like this.
  4. Meaker@Sager

    Meaker@Sager Company Representative

    Reputations:
    7,960
    Messages:
    50,280
    Likes Received:
    14,167
    Trophy Points:
    931
    Why did you enable the igp on a system where it is not even powered?
     
  5. Prema

    Prema Your Freedom, Your Choice

    Reputations:
    8,118
    Messages:
    6,039
    Likes Received:
    15,287
    Trophy Points:
    681
    There is no such option in Prema Mod as the iGPU is physically not even connected / wired up.
    He didn't enable the iGPU but disabled the dGPU. An option which was added for better external GPU support and also labeled with "ONLY disable dGPU if eGPU is present!". ;)

    Anyway, just reset the CMOS/NVRAM by either using FN + D combo (keep holding while pressing power), removal of cmos battery or booting the system blind followed by holding F2 (to enter BIOS) and there pressing F3, followed by enter and F4, followed by enter.
     
    Last edited: May 19, 2019
  6. Meaker@Sager

    Meaker@Sager Company Representative

    Reputations:
    7,960
    Messages:
    50,280
    Likes Received:
    14,167
    Trophy Points:
    931
    Psh, who would read warnings anyway :p
     
    Papusan, j3rwin, joluke and 1 other person like this.
Loading...

Share This Page