Dell M6800 Maxwell GPU Heatsink for 980m 970m etc $100 + S/H

Discussion in 'Computer Components' started by Spring1898, Apr 27, 2017.

Thread Status:
Not open for further replies.
  1. Spring1898

    Spring1898 Notebook Consultant

    Reputations:
    88
    Messages:
    229
    Likes Received:
    41
    Trophy Points:
    41
    Up for sale are a few Dell Heatsinks I managed to secure from a contact. These are the rare versions that allow fixation to the Maxwell GTX 980m and 970m (and probably others) without modification (no dremel required).

    THERE ARE ADDITIONAL SOFTWARE STEPS to make these GPU's work in our Dell notebooks.
    I will include the link with the instructions to the forum page with purchase (not sure if I can link to another forum here).

    The upper copper piece is all in one plane, so that the height difference (with the added module from Maxwell) is no longer an issue.

    Below is the link where these were once available a couple years ago.
    https://www.aliexpress.com/item/Fre...Heatsink-For-M6800-CN-0K6D33/32378430617.html

    They will need new thermal pads.
    1mm over the ram
    3mm in the center and corner thick pads
    1.5mm over everything else.

    I have some extra pads lying around (6mw/k I believe) so let me know if you need some and we can work out the extra cost.

    $100 each + shipping anywhere in the world.

    I only have 5 so first come first serve, if there is enough demand I can ask my friend if he can source more but no guarantees as these are apparently hard to find, and not sure what they were made for.

    20170427_195657_resized.jpg

    20170427_195543_resized.jpg

    20170427_195530_resized.jpg
     
  2. Easa1912

    Easa1912 Newbie

    Reputations:
    0
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    5
    Is this still available?
     
Loading...
Thread Status:
Not open for further replies.

Share This Page