!Clevo P870km Problem with slave GPU and SLI!

Discussion in 'Sager and Clevo' started by kela777slk, Mar 17, 2019.

Tags:
  1. kela777slk

    kela777slk Notebook Geek

    Reputations:
    0
    Messages:
    98
    Likes Received:
    7
    Trophy Points:
    16
    Contacts is clean. in master slot both GPUs working and recognize properly! 3dmark over 15000k points, furmark - ok. BGA chips is ok, maybe problem in sli iterface. I order secondary GPU heatsink and original SLI bridge...
    When I receive the package (1 month), I will try to install and check again two video cards.
    if not still working, this will mean that the problem is in the interface (incompatibility) of the video card or in the motherboard...
     
  2. DARCODER

    DARCODER Notebook Deity

    Reputations:
    252
    Messages:
    780
    Likes Received:
    224
    Trophy Points:
    56
    Did you simply try to put a mxm into slave slot alone (instead of master slot ) ?
    If it is working then its your cable.
     
  3. Meaker@Sager

    Meaker@Sager Company Representative

    Reputations:
    8,215
    Messages:
    51,973
    Likes Received:
    14,849
    Trophy Points:
    931
    Master slot has to be populated.
     
  4. DaMafiaGamer

    DaMafiaGamer Notebook Deity

    Reputations:
    615
    Messages:
    919
    Likes Received:
    1,072
    Trophy Points:
    156
    @TheDantee had the same problem but for him the GPUs worked after a manual install. He uninstalled the driver using ddu and reinstalled them.

    Try this before considering anything being faulty.
     
  5. kela777slk

    kela777slk Notebook Geek

    Reputations:
    0
    Messages:
    98
    Likes Received:
    7
    Trophy Points:
    16
    hi!. I bought original new parts for my laptop. This is the SLI cable and the secondary heatsink. I installed it all. SLI settings not available to me. I tried the test program PhysX Fluid Mark and the second video card was loaded by 30%, the first by 70%. in the driver put PhysX load on the second video card. Thus, the video card works, but the SLI mode cannot be turned on, because not active in the nvidia control configuration.... i try install new operating system - Windows 10 and windows 7 - nothing change. no SLI in driver option...
    Maybe whose know patch nvidia driver for manualy enable SLI option?
     
  6. Prema

    Prema Your Freedom, Your Choice

    Reputations:
    8,265
    Messages:
    6,110
    Likes Received:
    15,583
    Trophy Points:
    681
    Flash stock BIOS and SLI will be magically fixed... ;)
     
    Papusan, kela777slk and DaMafiaGamer like this.
  7. DaMafiaGamer

    DaMafiaGamer Notebook Deity

    Reputations:
    615
    Messages:
    919
    Likes Received:
    1,072
    Trophy Points:
    156
    Yes a fix is coming though... In about 4-5 hours time :D

    Enjoying my holiday in Pakistan atm (a beautiful view on top of some mountains lol) so I’ll upload 9th Bioses at around 8pm here which is 4pm in the UK.

    BTW the heat and mosquito bites are killing me lol so it might take sometime. At least there’s better internet now.
     
    kela777slk likes this.
  8. kela777slk

    kela777slk Notebook Geek

    Reputations:
    0
    Messages:
    98
    Likes Received:
    7
    Trophy Points:
    16

    oh. ,Maybe a dream will be lucky to activate two video cards! i cannt flash stock bios because cpu is cofee lake - 8700, stock bios not support this cpu.
    how i can flash p870tm in my km board. maybe stock TM bios will fix this problem? flash need programmer or possible flashsing from USB flash drive?
     
Loading...

Share This Page