Clevo P870DM easy bios access mod

Discussion in 'Sager and Clevo' started by runix18, Oct 2, 2021.

  1. runix18

    runix18 Notebook Consultant

    Reputations:
    37
    Messages:
    237
    Likes Received:
    93
    Trophy Points:
    41
    Hi guys,
    Do you know how frustrating it is that every time you want to try a new bios or rewrite a corupted one you need to disassemble all laptop to access the bios chip? I figured out a method to circumvent that.
    So lets begin:
    1. Disassemble laptop.
    You have plenty tutorials posted here about that so I will not cover that again.

    2. Solder jumper wire to bios chip, and after isolate with kapton tape.
    [​IMG]

    3. Solder jumper wires to JTAG 8 pin connector and secure it with double sided adhesive tape.
    [​IMG]

    4. Secure everything with tape.
    [​IMG]

    5. Success.
    [​IMG][​IMG]
     
    Last edited: Oct 2, 2021
  2. Meaker@Sager

    Meaker@Sager Company Representative

    Reputations:
    9,355
    Messages:
    57,931
    Likes Received:
    17,635
    Trophy Points:
    931
    Oh that's what it was (I asked in the other thread).

    Back on my old GS30 I had a socketable connector added in.
     
    joluke likes this.
Loading...

Share This Page