1. You may have noticed things look a little different around here - we've switched to a new platform (XenForo) and have some new forum styles and features. This how-to guide will help you find your way around. If you find anything that looks strange, post it in this thread.

Asus Vista 32/64 Drivers

Discussion in 'Asus' started by GenTechPC, Jan 24, 2007.

Thread Status:
Not open for further replies.
  1. AzraelW3X

    AzraelW3X Notebook Enthusiast

    Reputations:
    2
    Joined:
    Feb 8, 2007
    Messages:
    13
    Is anyone else getting wildly inaccurate battery life estimates? For some reason the Vista battery monitor always seems to say I have somewhere around 1.5 hours at full charge, when in reality it's closer to 3+...
     
  2. sathelp

    sathelp Newbie

    Reputations:
    0
    Joined:
    Jul 9, 2006
    Messages:
    1
    BisonCam Vista drivers (32bit and 64bit)

    I have just found the drivers for my webcam. It is under the chinese Aser site but they work on my Vista 64bit Asus A7DC notebook with the 1.3Mb Bison webcam. Note is it called an Aser Orbicam in this driver.

    The link to the bison, logitech &Suyin drivers page is: Driver page for some other Webcams with the Bison

    The BisonCam (Orbicam) driver Zip file is:Bison Cam download all versions

    The download was very slow for me when I did down load it but the files are complete. I can only vouch for the Bison though.

    Once downloaded I unzipped, installed and rebooted.

    You then need to edit the registry or download the attached txt file and rename to .reg, then double click to import it or add the following or save on notepad as a .reg file and imported:


    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Cam5603D]
    "SensorType"=dword:0000000a
    "LensType"=dword:0000000c
    "ImageSize"=dword:00000001
    "ViewSize"=dword:00000a50
    "SnapItem"=dword:00000000
    "MPTest"=dword:00000000
    "RGB24"=dword:00000000
    "WideScreen"=dword:00000000
    "DeviceOffOn"=dword:00000000
    "CpuUsage"=dword:00000000
    "DcOffset"=dword:00000000
    "AeTable"=dword:00000000
    "PCB_SIZE"=dword:00000001
    "PropShowItem"=dword:00000000
    "SXGASize"=dword:00000001
    "BlockS3S4"=dword:00000000
    "AETarget"=dword:00000000
    "FlikerLim"=dword:00000000
    "InterpolationMethod"=dword:00000000
    "ADC"=dword:00000000
    "DC_Level"=dword:00000000
    "Gama_Offset"=dword:00000000
    "ImageEffect"=dword:00000000
    "ChkPacketHdr"=dword:00000000
    "SaBase"=dword:00000006
    "SaDivitor"=dword:00000006
    "SensorYUYV"=dword:00000000
    "AvgAE"=dword:00000000
    "Timer1"=dword:0000000a
    "Timer2"=dword:0000005a
    "PowerDown"=dword:00000000
    "DoXPC3"=dword:00000001
    "Do2KC3"=dword:00000001


    [HKEY_LOCAL_MACHINE\SOFTWARE\BisonCam]
    "AgcGainType"=dword:00000000


    [HKEY_LOCAL_MACHINE\SOFTWARE\WebCam\M2000]
    "StillImage"=dword:0000000a
    "MultiLangID"=dword:00000009


    (I found the above from another site by Ronak2032, thanks to him).

    The camera then worked a treat except that it was upside down, so a quick vertical flip /rotation done the trick.

    All sorted now for this one, just the ITE Asus Remote control 64bit Vista driver to find and I will be all done.

    I hope this one helps you guys out. I also hope that now one driver has been built for this Cam, that other will follow including the official asus driver.
    Good luck.
     

    Attached Files:

  3. gizbug

    gizbug Notebook Consultant

    Reputations:
    30
    Joined:
    Jan 6, 2006
    Messages:
    283
    My buttons to turn on/off wireless, bluetooth, adjust display, etc don't seem to be working on my V6J.

    When I press the button to turn on/off wireless, tells me I need to install Intel Pro Utl.

    I thought the ATK drivers where what i needed. Any ideas where I can download the ATK or HCONTROL drivers to get these hot buttons working again?
     
  4. gizbug

    gizbug Notebook Consultant

    Reputations:
    30
    Joined:
    Jan 6, 2006
    Messages:
    283
  5. x0vash0x

    x0vash0x Notebook Enthusiast

    Reputations:
    0
    Joined:
    Dec 2, 2006
    Messages:
    39
    GizBug - You NEED to install the Intel ProSet utility, and sadly, no I don't. You can look through all the driver pages, but I only found the G1 which has the Vista version of ProSet. Not even Intel offers it on their website.
     
  6. System64

    System64 Windows 7 x64

    Reputations:
    94
    Joined:
    Feb 13, 2007
    Messages:
    1,318
    Hey i have only one unknown devices, and it has something to do with ACPI

    Device Type : Other devices
    On : Unknown
    Location : Intel(R) 82801GBM (ICH7-M/U) LPC Interface Controller - 27B9

    Hardware IDs: ACPI\SMCF010 * SMCF010

    Anyone know where is the driver? i've tried all the ATK0100 ACPI drivers and none installed.
     
  7. Thomas-DK

    Thomas-DK Newbie

    Reputations:
    0
    Joined:
    Feb 23, 2007
    Messages:
    9
    I have posted this problem earlier in this tread. We are not the only ones with this problem. But no solution yet :(
     
  8. pufftissue

    pufftissue Notebook Evangelist

    Reputations:
    235
    Joined:
    Mar 28, 2006
    Messages:
    607
    Installing Windows Vista Ultimate:

    Everything was set up properly except the ATI video drivers.

    I thought that was very cool. No more drivers to download.

    Or am I missing something by using whatever Windows Vista gave me?

    I have the A8Jp
     
  9. Vitali77

    Vitali77 Newbie

    Reputations:
    0
    Joined:
    Mar 10, 2007
    Messages:
    3
    Hi,
    I am trying to figure out what drivers i need for my Z96j, i am running Vista Ultimate 64 bit, and i have tried the drivers on the first page and the only problem i have left is the microphone for which i have installed drivers and the speakers work, and the other problem is the FN button does not work, hence i cannot control the volume, etc. can someone please directly me in the right direction.

    Thank you.
     
  10. GSMD

    GSMD Newbie

    Reputations:
    0
    Joined:
    Jan 13, 2007
    Messages:
    9

Thread Status:
Not open for further replies.

Share This Page