AW18 with some little mods, but GPU still throttle.That will be my next challenge to find that.
But so far, it runs stable....
This card would be nice, but i tried to buy one. They only sell to companies. If you can get one, let me know how it performes.
If i read all the overheating problems, i remember back to P570WM with 3960X CPU. With downclocked bios, this device was heating my hole office.;)...
The power limit is not really a problem. 80W are ok for the given clocks.
After a few month, i get it work as it should:...
The 4940MX will be the bottleneck, because of optimus. To get the full power of RTX5000, you have to go up to 4,6 and higher on all cores.
More i can´t get out.
First run with P5200.
Here the first benchmark with NVMe:
Cpu is running fine, but combi score...
But check the read / write rates.:rolleyes:
Link is not possible. Nothing online. I get it from a chinese friend.
M18xR2 with NVMe:,
But it is only working in EFI as boot device.
In legacy the disk is shown after Windows start.
The full chopper heatsink is not so easy to cool down. After all the chopper is hot, it take a while to cool down to normal temps, but between 55...
Yes, i tested all 3 cards.
change refesh rate did not help.
Icc profile ,i did not try, but i think that would not help. Cards don´t work with 8...
They are all not working with stock display. You will get inverted colors
I use always a a choper shim with 0,8mm between core and heatsink.
Fixed with liquid metal on heatsink side.
That´s a normal Problem with pascal and turing. The core is 0,7mm lower then maxwell. So you don´t have a proper contact.
You have a massive contact Problem between die and heatsink. If it is ok and you dissamble it, you could read nvidia on die and see the chopper on...
Could you do same 3dMark benchmarks like Firestrike and Timespy, please.
Separate names with a comma.