1. Yes, what you see in monitoring software is actually a GPU die temperature. Other GPU components (soldered onto GPU PCB) can and often are much...
1. Your GPU is overheating, even when GPU (die) itself is ok while monitoring temps in HWinfo, there is some component (VRM?) that...
Six months passed since my last visit here, wow time flies and real life stuff hits hard.
Anyway: swap 1080 SLI for 2080 single. Yay or nay?
It`s good to hear, because I bought it (K5 Pro) too and I`m waiting for it to ship (for over a month now sigh).
I will post my...
Here is a picture of my taped 9900K just before it was placed in socket and somehow it works:
Here is AUO B173HAN03.1 proper, not "like" AUO B173HAN03.1:
If your LCD is AUO B173HAN03.1 indeed, then upgrade CPU to 9900K/9700K and you will have g-sync back.
any input about high clocks/GPUs usage with 144MHz screen?
Disabled SLI, ran the same stress test (Time Spy Extreme full loop, ~20 minutes) but now only on master card only (with slave still inside), max...
@aarpcard already tried this way and ended with zero improvement but another VC is the only solution I can think of.
Anyone here have a spare TM...
Pads are 100% proper, there's no doubt. Spent many hours on them, inspected each one, experimented with different thickness until I've found such...
I spent more than half a day for this and here are my findings:
1. VC is perfectly flat, no warping no bents, totally symmetrical. When laid down...
That would point out a poor contact with die straight away but it`s not happening. If you look at OP there is a graph with temps for both GPU...
Yes, of course - fans were blasting past 4k RPM.
I'm a blind baby in a foggy forest.
And how is that possible?
There is no visible defect on it anywhere (dent, puncture, etc).
I've added additional 0,5 mm shims for both GPU to definitely close any gaps there (so 1 mm in total) and... temps are exactly the same.
Be more specific (e.g. in my previously linked post with AIDA temps) and I will check them for you.
Thanks and where did you get the longer cable from?
The questions are:
- where to source a longer cable with a proper Clevo 4-pin plug (old broken 330W power adapter which I don't have?)?
- how to...
can you share "how to" about this mod (longer cable) please?
I would like to do the same, original is ridiculously short.
Separate names with a comma.