Chiming in: I'm still using an MSI 1070 I purchased from @woodzstack in 2017 (the larger card that requires chassis mods to field). I've had no...
Hi, all. I'm looking for a stock VBIOS for my Dell 970m (6gb). It seems as though I've misplaced my backup (give me a break, please - it's been 3...
This is fantastic. Well done, Maxware
11 series refresh could be as early as July, if the rumour mill is to be believed. I wouldn't hold your breath on a 1080 or a ti variant working...
And here are a couple of burnouts (45/45/44/44, 250/400) TimeSpy [ATTACH] Firestrike [ATTACH] Interestingly, with the beefy heatsinks,...
All right; Time for some figures-and-such. Performance tests Tests performed at 41/41/41/41, 220/250 (figured I'd keep with the benchmark set by...
Hi guys... Got back from GDC yesterday. I'll post some numbers and pictures re:5-pipe build in the next day or two. Sorry for dropping off the...
Actually... Most of my temp data is going to be poisoned by that...
Seconded on the 3-pipe cpu sink recommendation. I switched to one last night also and saw a dramatic drop in cpu temperatures (and the same...
All is good; Thanks for asking! I'll post some pics and details during the week. Short summary is: 1. Card working great (no weird drops during...
Hah! Amazing. Good timing again, too; I just got the laptop built back up minus CPU and GPU! @woodzstack I never would have guessed! They...
That's a relief. I was worried that something was seriously amiss! Thanks for the quick reply. Time to rebuild!
Hi, guys. I'm half way through the mod and have noticed something... odd. The card has two large black blocks (possibly vrms) that prevent it from...
Great news! +points for the custom sticker I'm still waiting on my 5-pipe and card. I'll post temps and scores when I get one or both. As an...
Hi, @ares6 -- We haven't figured out how to get the Eurocom version of the card working properly with the M17XR4 using the 120hz panel. It...
The Eurocom variant seems to be a bit different. It's not working correctly with a 120hz screen in PEG mode with a full UEFI config (using the...
Hi, all. I recently got my hands on a low-power Eurocom 1070 from @woodzstack. Installation wasn't super-difficult (because it uses the old mxm...
Hmm... I quite literally did the same upgrade this evening using two wires rather than 3. No -noticeable- wireless reception issues on N (I don't...
Another month later: Replacement slot/board/reader finally arrived; new assembly with a new cable from eBay. All of... 10 dollars....
Months later: I took the time to remove the port and re-seat the cable on both sides. No dice, unfortunately. I'll order a replacement off ebay...
Separate names with a comma.
