By default it should be turbo boost to 3.8GHz when only one or two cores active. BIOS doesn't allow it turbo boost to 3.8GHz with all cores?
You can consider aluminium then. You can use fins from old heatsink. However you still need to grind or sand it down to proper thickness. You...
Yes, the thermal settings doesn't work well. Thermal throttling will activated once CPU reached 100C. To improved cooling you need to do copper...
Possible. The only way to rule this out or confirm is by increasing the power limits. Then we can see at what temp thermal throttling kick in. At...
HWiNFO reported Turbo was disabled. Strange XTU says it enabled. Either one could be wrong. Both TDC & CPU Power Limits probably the reason why...
Why Turbo is disabled? All of the benchmark I've seen show no difference in performance between dual-channel & quad-channel. There is one that...
No need additional stuff. Just make sure your vidock is connected to your laptop & turn on before turning on the laptop. Did you try force...
Because at that time they wrote the manual, 8GB stick does not available yet. If the BIOS permitting (i.e. not buggy), you should be able to...
Does Folding utilized all cores? I'm not familiar with Folding only BOINC. Did you try setting multiplier for all cores (set Extreme Edition to...
EDIT: Sorry, please ignore.
Thank you very much, unclewebb. The reason I'm asking because I'm trying to figure out how to read/monitor CPU frequency in Mac OS X. As far as I...
Hi unclewebb, I'm using ThrottleStop v5 & I noticed the reported multiplier has decimal point. So, it safe to say ThrottleStop is not reading MSR...
I only know we can fitted 1558 motherboard in 1557 notebook but I don't think you can fit XPS 1647 motherboard though.
It's because eGPU only running at PCIe x1 link & the bandwidth is only 5Gb/s concurrent. It also doesn't work at PCIe x1 full performance because...
x220 also have high TOLUD but they have dynamic TOLUD which means it will lowered when eGPU is detected when cold-boot.
1) Did you check the CMOS battery with multimeter? 2) Other than time & date, did other setting(s) change to default too? Please try change...
In the PDF (at EVGA website), it said to connect 6-pin & 8-pin PCIe power connectors to GPU. Fan spins doesn't means it get enough power to work...
eGPU draw power from +12V/+12V1 rail. Even though the PSU only use for eGPU, max current the PSU can support on the +12V is important. GTX560ti...
Chaosstorm already upgraded to 2 x 8GB ram (one page back). Any 8GB module DDR3-1333 1.5V will work.
If you don't trust Steam, do you trust PayPal? I use PayPal to buy game at Steam Store.
Separate names with a comma.
