You're right, we make valid criticism. It's not against the forums rules, so i do not see why you're having problems with it. But Nonetheless i...
That's true but that was one of the selling points which it CAN meet but (D)#ELL won't let that happen. If you bought the laptop on the premise...
I see that you're not informed about the "upgradeability" of the AREA 51m series @Papusan plss enlighten this fellow forum visister [SPOILER]
Increase your voltage. You can test it with TS Bench, you shouldn't get any errors. Your current undervolt is too unstable for...
I think you're on to something. I've never looked at the bios myself. Probably would be able to only extract the hex codes which could be...
The eeprom is encrypted so you even if you could gain access to it, you wouldn't be able to read or write from/to it. It's an typical vendor lock...
To make more money of the consumers back
Not all screens are created equal, but from 120 to 144, is smaller than 45 to 60Hz. It shouldn't be too hard on the display, but it's not a...
would be better with the 120Hz and 1440p IMHO. That can be overclocked to 144 Hz if you want for more competitive gaming.
All the way down, just tight it until you'll feel the screws exert some drag. That way you'll know if your screw reached the end of it's thread....
Yes I am bro, the places where there used to be pads, are all replaced with K5-Pro. Sorry I did not see your comment.
That is your core clock dropping to 800Mhz. They mean a 800Mhz drop which freezes your machine. Yours just downclocks heavily.
Nice fix bro. Happy benching/gaming
Your voltages probably. Are you running static voltage or adaptive, what is your undervolt, and which components did u undervolt (core, cache,...
After time it becomes like window silicon indeed, but a little but less viscous. Every time I remove my heatsink it reminds me of that gum you can...
Yes. tightened down fully
8950HK/1080. @4.3Ghz running against the 110W thermal limit, my temps stay below 85c. GPU usually stays around 67C @220W. Combined i can pull...
I is
It's been great for me. Pasted all my VRM's with it and haven't had any problems with my memory chips or voltage regulators overheating anymore.
K5-PRO. i never mess with pads. Just put a small glob of K5-PRO and tighten the screws in a cross manner.
Separate names with a comma.