Also applying decent pressure on heatsink so it will spread easier.
Remove the head.
Just drill off the head and pull the heatsink off. Then you can remove the rest of the screw with pliers. Start with small drill (0,5 mm) and move...
Try a correct screwdriver head and apply some pressure while turning slowly. You could also drill the head off. Be cautious with all that metal...
If you know wich area needs the heat then yes.
Bake it! Might take few tries to make it work or last again. Nothing to lose anyways. It would be wise to use an old oven so you won't...
Any chance you'll send to EU?
First get yourself a correct screwdriver bits (PH1 for most screws in my case and you can get a set in every hardware store) and new thermal paste...
Or flip the whole fan upside down like seen in new Clevo P775TM1.
Managed to repair mine so thread closed.
You can bend the four springs to increase the mounting pressure. Also when you screw it down apply pressure to the heatsink to make sure it is...
Better lay the thermalpads on the card to make sure they are all in right place. I've noticed that the long blue strip for mosfets are on top of...
All is good so don't worry about it.
I had it a bit cooler with 680M SLI, but when I upgraded to 980M SLI then the GPU2 started to run hotter. The gap increases when the temperature...
It was 2-piece EM heatsink on the video so if you already have CPU and GPU2 heatsinks separated then you have the better heatsink. Things you...
Yup. EM's slave GPU shares CPU heatsink.
Can't see the picture.
Some modding is needed but you can make it work. We use basicly same hwatsinks. You either replace the motor and fan so you can use old fan...
Merry Christmas
Did you remove battery and power cord before you opened it up?
Separate names with a comma.
