Alright I finally got a 330w PSU but it's just barely better than my 230w. I can get a few more mhz on the GPU before the throttle happens again....
I'm using the Clevo PB71DF2-G. I'll try to get a jack adapter. With the shunt mod my GPU is at ~140w and my CPU is around 60-70w during games if I...
I still can't find a proper way to get a psu capable of delivering more than 230w (the laptop power throttle since the shunt mod during gaming...
You just have to go in bios settings > Advanced > Overclocking menu > Memory and from there you can choose which profile to use for your ram (for...
Hello, yea that will work for sure, I have 1,35v 3000Mhz ram that run without any problem using XMP profile. Though the ddr4 frequency listed for...
Ok so now I feel like I have some power issue. When my GPU load is at 100% and my CPU around ~50% in game, the laptop starts to throttle for 2-3...
I successfully shunt modded the laptop and got a bump of ~12% performance on gpu using 0.02 ohm resistors on top of the original shunts. Now I'd...
I had no idea neither, I just accidentally removed it while trying to slowly pull the shunt, leaving only the metal conductors on the board. So...
Okay so I had hard times trying to desolder the stock shunts, so I just removed the black plastic "hat" and soldered two 0.02 ohm resistors on top...
Alright thanks for the clarification. I never dealt with reversed footprints before, I guess they are not so common. I ordered the r004 susumu...
Okay I'll stay away from liquid metal then, thank you. One more stupid question, is there any difference between those 2 resistors ?...
Alright I wanted to look closely to the shunts but in the end it doesn't seem to be "silver" edges for contact. New pics joined. So where are the...
That's very interesting. I'd avoid soldering if I can since my solder skills aren't very on point. Does this method also work with liquid metal ?...
I see, thanks. What about these : https://eu.mouser.com/ProductDetail/754-KRL3216CR004F-T1
Can I use something like this to replace the stock ones ?...
Oh alright I might try it. Do you think I can replace the stock ones with my 0.036 ohm shunts ? If not do you have any link or a reference for the...
I'm not comfortable enough with this for replacing the stock shunts outright. For the last shunt I did I simply put the 36mohm resistor on top of...
Thank you ! I just already had them for another shunt mod I did before, I didn't get them for this laptop in particular. What shunts would you...
Thanks for the confirmation about the shunt resistors. Here is some pics of the vrms. I already have those resistors :...
Hello, I'm thinking about doing the shunt mod for my laptop (Clevo PB71DF2-G), and right now I'm trying to locate the shunt resistors. I found...
Separate names with a comma.
