Anybody else ran into problems with games wich support alienfx? I tested Dying Light, Payday 2 and Killing Floor 2 Everytime i start these games...
I‘m happy with 2x 1TB Evo Plus :)
I tested 1.5 without problems, R1 from April 20 i don’t know if it’s protected or not, I can’t test it with the software without a compatible board.
BIOS 1.10 I don’t have a DDR4 board to modify the RAM atm.
Works only with the 2933mhz version, I tested it with the 2666mhz version before and with the ADATA Hunter 3000mhz kit
I tried the HyperX HX429S17IBK2/32 2933MHz, now I got the options in AWCC but I can't change the Speed only CL, any ideas except editing the RAM...
I tested the Adata Hunter 3000mhz today, still running on 2400mhz
I could buy the ram in germany, delivery date is mid/end of may Edit:...
same for me with the fan control
@devilhunter try a second restart and it get stuck again, try my solution from the page before
@Spartan Videoproof of my method: [MEDIA] edit: video was low quality, new video should be online the next 5 minutes
it was a joke because no one outside of this forum is complaining about the problem :) I tested it with two area 51m I reinstalled OC Controls,...
100% this forum cause the issue! i think most owners are here, and the problem exist since around 2 days.
Found a solution: Reinstall OC Controls and then set write protection for the following file before restarting C:\Program...
In the folder you linked are the files for the OC settings in AWCC. These file get overwritten if you reinstall OC Controls and a second time...
If you set OC to off the limit is 87°C. After activating a OC profile in AWCC it’s 75°C
Found some interesting GPU configs which cause the problem. They also include a m15 and m17 R3 config. The config file will update itself trough...
I tested 5.2.75.0 and got the same problem. I deactivated my WiFi so it can’t update. After a second restart it’s locked at 75°C
@Spartan Do you tried a second restart after reinstalling OC Controls? For me it always work after the first restart, which is required for the...
Only fix is to reinstall OC Controls and do the restart after the installation. A second restart will fix the temp again at 75. I tried it with...
Separate names with a comma.
