TBH the driver bundle and your install of windows is much cleaner. There's nothing that you need or want that isn't in the driver package anyway, IMO
I also have shoddy reception on my MK1 G1 W7. I use streets and trips for maps and navigator and xport (it reads the gps/com port and creates...
I try to buy my lind's used on ebay for <$20 and salvage/make my own cables.
Also, there is an IBM ac/dc power brick that kicks ace for <$30 on...
win7 sp1 has drivers but no stack.
I though I installed sp3. Maybe not, because it did all the things I needed it to do, or thought I needed it to...
win7 doesn't have a bt stack built in, though.
What should I use then?
I have an fzg1 running win7 and Toshiba BT stack 10.x
It will connect to my car stereo or 2 other BT speakers, no problem.
If I turn off the BT...
The obvious solution to reattach my failing rubber trim would be contact cement, I just thought I should ask here before I commit to it. this is...
as far as the dock connector, we still don't have an off the shelf solution? They they seem to be 1mm contacts on 1.9mm pitch.
I really would...
Power is as simple as just hooking power up to p4 and p5? nothing extra?
Awesome job, Sxueshu!
Can you confirm pins, please?
I'm sorry I didn't get more internal pics to you, I got busy with work and then the whole...
It has to do with ublock origin. nbr works if i disable ublock for nbr
though i'm not sure which filter or setting is actually blocking it
I use firefox and a few ad blocking/privacy extension: apparently they interfere with my ability to use NBR.
A rumbler setup has the...
I'm looking to get my hands on a rumbler siren setup but I'm not looking to spend $800 new.
Does anyone know where I can get my hands on a...
P4 & P5 have 0 volts when dock is powered and no FZG1
also P4 & P8 have 0 volts when dock is powered and no fzg1
This is irritating!
The only pins that exist on both ikey keyboards are
Pin 1 unknown
Pin 10 5v
Pins 12/13 usb2
The only thing I can figure is...
P5 & P22 is 200Mohm
P4 and P5 is open/0v
I will not I will not be back to my dock for a week or two, but will be glad to check when I do
I used my DMM to check a couple pins.
From the dock thread
I get no voltage between P4 and P5-P10
The grounds have continuity between them
The grounds have continuity to the bigger spring loaded spikes on...
You can pick up an Mk1 FZG1, i5 4gb ram that will run win7 (or 10, if you want - meh) for less than $400, and it has multi touch capacitive and...
Separate names with a comma.