Nice attention to detail in that article.
Maybe 70 C for a very very short time?
According to the data sheet your SU800 can handle up to 70 C.
I know no more about the adapter in your link than you do. As far as whether it supports NVMe or not,
that common phrase on ebay comes to mind:...
Please note that this type of adapter is compatable with M.2 SSD but
not compatible with M.2 NVMe or PCI Express SSDs.
There are less expensive...
To watch movies on disc when on autopilot.
Toshiba Reserve Stylus PA3317U-2ETC is a popular substitute pen for the CF-19.
Your CF-19RDT5A1M is a dual touch. Do you happen to be using a digitizer pen?
Did you go into the bios and hit F9 to reset everything to normal?...
Did you right click the exe file and "run as administrator" to install the driver pack?
Otherwise it runs and doesn't work so they say.
[ATTACH] If you can't get what you want, the factory GPS isn't too bad
[ATTACH] Good Old Days ?
Go easy with the hot air, or the plastic under the contacts will curl .:(
My source of hot air was a PVC welder.
Still need to clamp after heating.
I believe you are correct that the connector to the motherboard is the same for multiple models.
Pictured are CF-19 and CF-H2 ribbon connectors....
To determine if the touchscreen is the cause of the problem, you could physically disconnect it.
To do that, as you may know, you will...
The inlet for cooling air on your CF-31 is through an odd shaped perforated grille at the front left corner. It is facing down, not to be confused...
The screenshot shows your GPS using com port 6.
Is that where the factory GPS is ?
The spacers are to keep a distance between your hand and the source of RF transmissions..
The earlier CF-19 antenna cover(s) is a good example of...
When I first read this information it seemed unbelievable so I went and bought a CF-31AHAGX2M for experimental purposes.
The CF-31's GPS picked up...
Our marriage was struggling. My kids were disobedient and my finances were destroyed. We bought a Toughbook and it brought our family together,...
Separate names with a comma.