I meant that on steady state load, after 30 min in Prime Small FFT/Blend, the average voltage (which is the VID in HWinfo I supposed, also based...
When I uncheck it in TS, it seems to go back to whatever is set in the BIOS (110 in my case). I´ve left it at 95 PL1 and 100 PL2, and that does...
That makes sense; I tried what you said and when I undervolt the cache, the temps stay the same (because my main limit is PL1 throttle) but the...
I tested again and it´s exactly as you say with XTU; with Throttlestop I could change the cache voltage on-start and still boot into the BIOS. I...
Two further questions: does Throttlestop report incorrect current limit values? If I go by what says in the BIOS my current limit is 100...
I checked; it does not show any change in the cache voltage in my case: [ATTACH] It also looks the same in HWInfo or XTU.
I have managed to undervolt stably to -90 mW in my P775 TM1-G, but the Bios option only modifies the core undervolt. I cannot find the CPU cache...
This is where I have been deriving most of my conclusions, so YMMV (I do not know if it is a good reference or not, but might be of use)...
My knowledge of it is sketchy at best: PL1 I think is the maximum sustained load the CPU can draw and is only guaranteed to go up to the base...
Turns out you helped me more than I thought - when I got home I realised that I do indeed have the Power Option, but they did not solve the issue...
Regarding my previous question, I noticed that my CPU only draws 65 W, stat, under maximum load. However the unit in Notebookcheck´s review with a...
I believe you have to ask them (e.g support ticket) for older versions; at least that is what I am used to with other OEM computer...
No problem - that is already helpful as I know that it´s something odd in the thing. Maybe I just missed it (which is likely in me) I will try to...
My bad - I meant I cannot see that tab on the control station, not in the updater (I have both installed) I remember the Control Station asking to...
Stupid question: Does anybody know how to redownload the BIOS from within the Updater? I installed XTU on a p775 TM1-G and it resulted in the...
UPDATE: After getting the HyperX sticks it seems there is a hard cap on speed with 4 dual-rank sticks (which I guess is to be expected...) I...
In case it is useful for people, I went with the HyperX ram and 64 GB - apparently I had it wrong and the humongous amounts of RAM are needed if I...
You will need PWM fans, as that is what allows you to control them. I will go into pressure later. (Wall of text incoming, I do not know how to...
I made my own recently for something similar to yours (Clevo p775 TM1, 9900 and rtx 2080). I don´t know about that controller, but as long as it...
After asking the people at work, I will likely go for the Hyper X. Relion does not get that much of a performance improvement from fast RAM, and...
Separate names with a comma.
