I have a 240w alienware adapter, which look the same the precision 240w,. Everything work the same except the label the different，i believe they...
Going back to school in September, looking for a "cheap" lightweight thinkad with battery life. START COPY ========== General Questions 1)...
Broadcom based Azureware CE-123h? I have it in all my machines and it trumps the 7260~, minus the "enterprise software".
The m6600 will take the 6xxm / kx000m gen cards, so 680m or k5000m. Another good value option is the AMD m6100, which will use the same heatsink...
Dp on dock can do 4k30. The right hand side dp port may do 4k60 but I can't really remember. Sent from my XT1575 using Tapatalk
I would try power reset or CMOS reset. Do you mean it just boot up one day and stop working? Sent from my XT1575 using Tapatalk
You have i5 or i7? Sent from my XT1575 using Tapatalk
mobile gpu tend to drop slowwww, I sold my 6970m for ~180 last year.
They all works afaik. From 2630qm to 2960xm. Can be said as easy, I mean there aren't any easy breakable parts or stupid clips, just follow the...
Just started setting up my retired m6600 as a htpc for my parent. I removed the m6100 and run it with the intel HD and now I realize what people...
You need the 1.5V DDR3, you should able to get 16gb around 50ish.
It is not the matter of age but these Dell HP workstation bios don't seemed to ever get modified/cracked. Sent from my 306SH
That should be fine, just make sure you check the contact for the core and heatsink. I sometimes just remove the heatsink right after tightening...
970 can be found ~250 skylake z board with OC i3 ~200-250? best buck option would be 7950/7970/280/280x/380 budget budget budget option is always...
Just paste is fine, reuse the pad on the chipset.
Usually tries changing raid to ahci in bios. In win8 win10, moving HDD works most of the time, but not sure about xp. Sent from my 306SH
Yea, the pressure push it thinner bit. The memory one probably need to push down more. What really important is the vrm, memory doesn't really...
It was year ago but I used some more squishy 1mm and they work fine. Sent from my 306SH
Software OC do not work, you have to flash the clock you want. even then the clock still fluctuate, just at a higher range.
The edp m6800( the later batches) use a different pin out on the connector. I think it is 30 vs 50pin. Sent from my 306SH
Separate names with a comma.
