Usually for 980M the top left one is dying.
I intend to add iGPU power phase in P751DM. I might have all the missing components except the MOSFET driver.
However after some driver install it...
Yes, this one works.
SPI programmer is needed.
There is no much choice of clevo MXM 3.1B, lowest is GTX1060.
I haven't tried PCIe SSD in any clevo so far just to see if it works, only nvme.
Don't know where to get from except ebay.
It has to be functional.
On the other side, egpu via pcie x1 is not a very good option.
If you can make one which works on the SM Bus then maybe yes.
MXM is needed because the EC wants to read it's temp.
With no MXM, it will shut down in half of minute.
Does anyone know how Flexikey software finds out the board model or how it decides about the missing/present lightbar?
I tried to flash main and...
Did the socket pins burn out?
Dump this bios just in case you will need it for your laptop.
There is no resistor in place you marked with 1. Checked the green PCB card, it's nothing there.
It is 2,3,4,5 only, 1 was already in place.
This is clevo MXM 3.1B.
There are some 3.0B standard shape RTX, but heavy prived though.
nVidia mods/mats tool full test will say what is the problem.
This can be maybe memory error or some GPU processing unit defect.
Fan control worked fine for me.
My multimeter does not measure those quite well, I think it's 0 ohm resistors.
I have the P751DM2-G clevo, since this last windows update audio drivers broke. Clean install of windows with old drivers did not solve the issue....
This might be an offtopic here, but, I have an issue with latest windows update and audio drivers on my P751DM2-G clevo, the sound is lower than...
Separate names with a comma.