Also i tried with the same values again windows and the screen was in black after some minutes in idle
well in windows is ok but stress on aida give bssod
MSI after restart to save the settings put the uncore to 0 again... and i need always make a cmos reset to put the laptop operating again.
But with my specs in ram what you recommend?
Set DRAM Reference Clock (MHz) to
Set Memory Ratio to
Set tCL to
Set tRCD/tRP to
Set tRAS to...
What settings you recommend? And why i need lower the uncore to 50 and not stay in 125?
@greninga Uncore 0
Any settings from you is ok on windows but stress test from aida crash pc.
I dont know if this info is important but when i had single slot with...
Well i dont know if -140mv on cpu is the reason for bad overclock in ram...what i can tell is that not is the undervolt that is causing the blue...
@greninga can you check my ram settings and help me with oc in rams for 3200? I have a GT75 8RG
Any expert can help me to overclock my rams from 2666 to 3200MHz?
Here are my default values:
Its that i need know :D, when Pomona 5250 arrive, i will just try a “read” on skypro and then make a backup of original Bios. Because if i flash a...
Pomona clip still not arrive but i think that could put the jumper wires like this way right?
Ok, many thanks...i will respect the dip 8 symbol in skypro.
Yes, i will use Ponoma clip to do the job but i need know how to pin the jumper wires from 5250 clip to the skypro...its like you mentioned?...
I can use both positions with a dip8 chip? Or i need use the "2" position? Also de diagram of the chip is the correct on the...
In games, you detected any throtting? Or is always at 3,9Ghz?
You can do the same as acer in Bios or TS.
That is the problem, with all respect to HIDEvolution, that cover mod with increase the temps of ssds for example.
Separate names with a comma.