Well I am on the latest BIOS and the 87 slider works fine. After the latest update of Alienware command center I did paste in the profiles.zip...
So I might be forgetting but does the earlier BIOS let you go above 87*C on the GPU?
Rebooted and still there. Did you mark them read only? I had to get my AWCC from msft store btw. not sure if that changes things but the temp...
With the most recent update I lost the thermal slider action. I just copied in your Profiles.zip and that fixed it, no uninstalling and such....
Might need to look up the schematics of the laptop and find which pin then.
Usually the blue wire.
Pick up a variety of thickness thermal pads and take your time with placement and squish. Maybe get some clay to use to confirm heights and such.
Yeah your GPU seems fine then. Maybe get the 5 pipe to keep it running cooler. Some folks blew up their 1070s.
Ok that score might be appropriate then for the CPU and ver. of 1070 you are using. Mine would be about 1k lower when the core current was set to...
Sold my laptop but looks sort of like this (example picture found) where "Core Current Limit" lower left. R4 defaults to 32A due to BIOS.
CPU page. Should show core current 32A
Use XTU and check your core current, change it from 32A to 112A and re-run.
I had to dremel out my stock heat sink at first. I do not see any adjustments on yours. Makes me think that it is not really flat to the GPU. I...
Glad to help! Found a lot of good info in the forums so happy to pass along.
Really neat that you do not have to run HWInfo for your GPU fans. I...
Burn it all.
freezes. same number
Open HWinfo w sensors.
Timer stops and fans are stuck at RPM.
Try it. Usually I still get a freeze 100-140 hours in. Sold the laptop since I got tired of it.
Separate names with a comma.