I have an fzg1 running win7 and Toshiba BT stack 10.x
It will connect to my car stereo or 2 other BT speakers, no problem.
If I turn off the BT...
The obvious solution to reattach my failing rubber trim would be contact cement, I just thought I should ask here before I commit to it. this is...
as far as the dock connector, we still don't have an off the shelf solution? They they seem to be 1mm contacts on 1.9mm pitch.
I really would...
Power is as simple as just hooking power up to p4 and p5? nothing extra?
Awesome job, Sxueshu!
Can you confirm pins, please?
I'm sorry I didn't get more internal pics to you, I got busy with work and then the whole...
It has to do with ublock origin. nbr works if i disable ublock for nbr
though i'm not sure which filter or setting is actually blocking it
I use firefox and a few ad blocking/privacy extension: apparently they interfere with my ability to use NBR.
A rumbler setup has the...
I'm looking to get my hands on a rumbler siren setup but I'm not looking to spend $800 new.
Does anyone know where I can get my hands on a...
P4 & P5 have 0 volts when dock is powered and no FZG1
also P4 & P8 have 0 volts when dock is powered and no fzg1
This is irritating!
The only pins that exist on both ikey keyboards are
Pin 1 unknown
Pin 10 5v
Pins 12/13 usb2
The only thing I can figure is...
P5 & P22 is 200Mohm
P4 and P5 is open/0v
I will not I will not be back to my dock for a week or two, but will be glad to check when I do
I used my DMM to check a couple pins.
From the dock thread
I get no voltage between P4 and P5-P10
The grounds have continuity between them
The grounds have continuity to the bigger spring loaded spikes on...
You can pick up an Mk1 FZG1, i5 4gb ram that will run win7 (or 10, if you want - meh) for less than $400, and it has multi touch capacitive and...
I need to get home to my DMM and my vebg11 dock!
Thank you Sxueshu for your interest and work and
Thank you, Shawn for all the work you have...
Dern it! I don't have a DMM with me.
So, can someone see if there is voltage on g1 connector pins? I have a feeling that pins 1-3 or 20-24...
OOOH! Someone else who is interested in the pinuot!
So far as I know, the dock connector does not put *out* voltage, only signals. That's why the...
I see that Ikey uses the Pogo connectors. I just ordered a hundred of them... I can make do with those.
Harbor freight has a set of security bits for <$10, and it should include that one, IIRC.
Separate names with a comma.