Strange. I didn't have such problems with CH341A. Most complicated part was that 1,8V adapter is totally unnecessary and you need to plug into...
Have you tried overclocking your 1060? 120-140W should be plenty for 2 GHz without any problems.
There's whitening toothpaste with diamond particles. It might be as good as ICD
Well I never had problems with my Win10 hotspot.
Never had a problem with ICD drying out. I never spread it just put a little blob in middle of gpu/cpu. Though I put ICD syringe in plastic bag...
On laptop that does not officially support gsync you wont be able to make it work on integrated screen. Is there a way to force G-Sync ?
AFAIK laptop gsync is more than correct panel + gsync card. Some NBR forum members reported that changing just cpu would disable gsync.
left alt+right ctrl+right shift+f2 while in bios
Either contact Svet on MSI forums or mess with advanced BIOS options
I suggest you to contact @woodzstack
The panel you linked is not edp. Its same panel used in MSI GT80 and GT83VR. Its lvds panel. As far as I know only asus 18.4" sli laptop had 4k...
Preset for 1070 is 150-170w adjustable. Definitely not 215w
I think you problem is that Pascal tweaker thinks it is desktop gpu. https://www.techpowerup.com/vgabios/206945/206945
You could try to flash...
When I tried to use 1.8v adapter I couldnt detect my chip. You could try with adapter. If it wont work try without one.
I've used this video tutorial for setting up programmer.
In description there's all necessary files. My program version is 1.18. Also I...
First of all make sure you're connect clip to connector correctly (see attached picture). Then make sure jumper on programmer is on pin 1 and 2.
You have black pcb CH341A?
Get 1mm 0.5mm and maybe 1.5mm but worst case you can stack 1mm with 0.5 mm
Worst case just overlap them.
Do you mean trade in or purchase new laptop?
If you already used your trrade in once you're not eligible for second.
Separate names with a comma.