np8690 beep and crash?

[vforce1]

ok im not sure what the problem is but i have replaced the gpu from a dead 5870m to a 4870m (another story) then to a gt240m from a dell m15x the display came back on and i was able to go into bios and what not until like the 3rd or 4th minute when it starts beeping then after about 1 minute it shuts off completely. i also tried to boot into knoppix 7 and it did work and i can use it like normal until the beeping and crashing part however theres no beeping but still crashes i can show u guys a video of the exact problem
both times the cpu fan DID NOT SPIN however when i take out the GT240m and put the dead 5870m back in the cpu fan will start to spin
but obviously i cant see anything
how can i fix this problem?

[Silverfern]

did u check if the ram is working fine?

[vforce1]

yes i did i tried removing both sticks and they both boot same way

[vforce1]

i see something i dont think is right on the mobo next to the cpu maybe this is causing the issue? if i carefully desolder the points will that fix the problem?

[Silverfern]

is there a reason why it become melted in the first place? if there isnt, then i dont think its a good idea

[vforce1]

i dont know, i wish someone has same laptop that can tell me

[Silverfern]

is there still warranty on it?

[vforce1]

no there isnt

[Silverfern]

what card is that? 5870 or 240?

[vforce1]

thats a pic of the motherboard next to the cpu slot closest to the rear end