GPU temp = 96..97°C !!! Clevo P170HM

[Selgot]

Clevo P170HM with CPU Intel Core i7 2860QM & GPU GeForce GTX 580M

In during test Geeks3D FurMark 1.9.2 I have temperature of GPU = 96..97°C !!!
Idle - 38...46 °C

In "Clevo Guide v3.0 - FAQ and Reseller Info ****READ BEFORE POSTING**** " - write......
"...Any temperature for any component above 95C is dangerous. That includes CPU, GPU, RAM,.." !!!!!!!

Fan working normal, on MAX. Thermal grease is new...

This is normal or not ?
Can somebody will check up this test? (Geeks3D FurMark 1.9.2)

[Aikimox]

Originally Posted by Selgot

Clevo P170HM with CPU Intel Core i7 2860QM & GPU GeForce GTX 580M

In during test Geeks3D FurMark 1.9.2 I have temperature of GPU = 96..97°C !!!
Idle - 38...46 °C

In "Clevo Guide v3.0 - FAQ and Reseller Info ****READ BEFORE POSTING**** " - write......
"...Any temperature for any component above 95C is dangerous. That includes CPU, GPU, RAM,.." !!!!!!!

Fan working normal, on MAX. Thermal grease is new...

This is normal or not ?
Can somebody will check up this test? (Geeks3D FurMark 1.9.2)

Furmark is not a representation of a real life load on the card. Run 3Dmark Vantage and check if you are hitting above 85C. If not, you are ok.

[Selgot]

Originally Posted by Aikimox

Furmark is not a representation of a real life load on the card. Run 3Dmark Vantage and check if you are hitting above 85C. If not, you are ok.

Ok, now I am dowloading 3Dmark Vantage...... and will check.
P.S In CrySis2 GPU hitting to 89...90C

[Aikimox]

Originally Posted by Selgot

Ok, now I am dowloading 3Dmark Vantage...... and will check.
P.S In CrySis2 GPU hitting to 89...90C

That's too high. Is the laptop sitting on a flat surface with no vent obstruction?
You may wanna repaste it and check for possible heatsink contact issues, dust, etc .

[MrDJ]

have you ever cleaned out the fans?
the no. 1 problem with high temps is a build up of dust around the fans and vents.

[Selgot]

Originally Posted by Aikimox

That's too high. Is the laptop sitting on a flat surface with no vent obstruction?
You may wanna repaste it and check for possible heatsink contact issues, dust, etc .

Laptop sitting on a flat (table). I have renewed thermal paste on GPU....

[alucasa]

A little high but not alarming. At 90c, you have 15c of safety.

[Selgot]

Originally Posted by MrDJ

have you ever cleaned out the fans?
the no. 1 problem with high temps is a build up of dust around the fans and vents.

Fan in clean !! My laptop bought 2 week ago ! All inside is pure!

[jaug1337]

Make sure you've put the battery power plan to Performance.

P.S. What kind of material is this table of yours made out of?

[Selgot]

Originally Posted by jaug1337

Make sure you've put the battery power plan to Performance.

P.S. What kind of material is this table of yours made out of?

Now I am holding my laptop by hand 1m over table !
Not difference...