Quantcast CF-19 upgraded to windows 7. Misc driver problem

Closed Thread
Results 1 to 7 of 7
  1. #1
    Notebook Guru
    Join Date
    Aug 2010
    Posts
    71
    Rep Power
    11

    Default CF-19 upgraded to windows 7. Misc driver problem

    hello everyone, new to the forum.

    i have a toughbook CF-19CHB06BE.

    i followed the guide on here about upgrading to windows 7. i have followed just about all of it except the audio driver and video driver. the audio wouldnt work when i changed the driver but works ok without any alterations. although the speaker is constantly making a slight hissing sound but i think that a hardware problem. the video i didnt do because it looks like a long process and as far as i can tell the display works fine.

    my problem is this Misc Driver. ive tried downloading loads of them but im not too sure how to install/put them in the right folder.

    i want to install the screen calibration and battery calibration but they wont because of this misc driver.

    i have yet to check the SD card slot, and a few other bits but everything else seems to work ok so far.

    also how long does the battery normally last. i was hoping it would be around 6 hours but its keeps telling me 6.30hours at full charge then 15minutes later 3hours.

    thanks

  2. #2
    Toughbook Aficionado
    Join Date
    Dec 2007
    Posts
    4,004
    Rep Power
    33

    Default Re: CF-19 upgraded to windows 7. Misc driver problem

    That battery needs to be calibrated... to calibrate hit control + f9 at boot up... Then it will give you an accurate reading. Also, how many cycles are on the battery?

    The speaker buzzing I do think I'm 99% sure it is a hardware problem.

    The Misc driver can be extraced via WinRAR into any folder on the desktop. From there you have to install it via Device Manager. (Just point the "driver search" to that folder which you just extracted it to on the desktop). The misc driver will show up as an "unknown device" in device manager.
    ~Rob - Rugged Depot LLC - (630)/300-8877~
    ~Fully rugged Toughbook user since April 18th 2005~
    ~New 4/24/14 - CF-G1AABAB1M/I5 1.9GHz/4GB RAM/480GB Crucial M500 SSD/Digitizer/Blueteeth/Verizon 4G LTE/LAN port/Win7 Pro~
    ~For the wife (New 3/20/14): Sony Vaio 21.5" hybrid desktop/Core i5 4200U 1.6GHz/8GB RAM/500GB 7200RPM Hybrid SSD/Webcam/Win 8.1~
    ~Gamber & Johnson Diamond Partner~
    ~Comcast 75MB/15MB static line~
    ~Owner of:

    http://toughwiki.com,
    http://robsnetworks.com,
    Toughbook RANT

  3. #3
    Notebook Guru
    Join Date
    Aug 2010
    Posts
    71
    Rep Power
    11

    Default Re: CF-19 upgraded to windows 7. Misc driver problem

    the misc driver has updated!! thanks.

    ive installed both calibration programs now.

    the next question. i just tried to run the screen calibration and when its says choose an input (touchpad or digitizer) they are both greyed out. the screen does react to me pressing it, its just not accurate at all.

    there are no other faults on device manager apart from the bluetooth adaptor, which i also want to sort out.

  4. #4
    Toughbook Aficionado
    Join Date
    Dec 2007
    Posts
    4,004
    Rep Power
    33

    Default Re: CF-19 upgraded to windows 7. Misc driver problem

    Since your model is a touchscreen model and NOT a digitizer you will have to use the calwin.exe program to calibrate the screen...
    ~Rob - Rugged Depot LLC - (630)/300-8877~
    ~Fully rugged Toughbook user since April 18th 2005~
    ~New 4/24/14 - CF-G1AABAB1M/I5 1.9GHz/4GB RAM/480GB Crucial M500 SSD/Digitizer/Blueteeth/Verizon 4G LTE/LAN port/Win7 Pro~
    ~For the wife (New 3/20/14): Sony Vaio 21.5" hybrid desktop/Core i5 4200U 1.6GHz/8GB RAM/500GB 7200RPM Hybrid SSD/Webcam/Win 8.1~
    ~Gamber & Johnson Diamond Partner~
    ~Comcast 75MB/15MB static line~
    ~Owner of:

    http://toughwiki.com,
    http://robsnetworks.com,
    Toughbook RANT

  5. #5
    Notebook Guru
    Join Date
    Aug 2010
    Posts
    71
    Rep Power
    11

    Default Re: CF-19 upgraded to windows 7. Misc driver problem

    i have loaded the cf-18 mk1 XP driver and the calwin.exe has worked. i can touch all the red crosses but then when i press enter the dialog box says

    error DTM

    parrameter error. please input again.



    i dont know what that means???

  6. #6
    Toughbook Aficionado
    Join Date
    Dec 2007
    Posts
    4,004
    Rep Power
    33

    Default Re: CF-19 upgraded to windows 7. Misc driver problem

    wo, wo wo... your OP said: "i have a toughbook CF-19CHB06BE" now you are talking about a CF-18 XP driver????

    Are we talking 2 different computers here?
    ~Rob - Rugged Depot LLC - (630)/300-8877~
    ~Fully rugged Toughbook user since April 18th 2005~
    ~New 4/24/14 - CF-G1AABAB1M/I5 1.9GHz/4GB RAM/480GB Crucial M500 SSD/Digitizer/Blueteeth/Verizon 4G LTE/LAN port/Win7 Pro~
    ~For the wife (New 3/20/14): Sony Vaio 21.5" hybrid desktop/Core i5 4200U 1.6GHz/8GB RAM/500GB 7200RPM Hybrid SSD/Webcam/Win 8.1~
    ~Gamber & Johnson Diamond Partner~
    ~Comcast 75MB/15MB static line~
    ~Owner of:

    http://toughwiki.com,
    http://robsnetworks.com,
    Toughbook RANT

  7. #7
    Notebook Guru
    Join Date
    Aug 2010
    Posts
    71
    Rep Power
    11

    Default Re: CF-19 upgraded to windows 7. Misc driver problem

    no, i just couldnt find the driver for this model and read in a thread about the same subject that it was sorted with the mk1 cf-18 driver. it half worked. except for the error message.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT -4. The time now is 05:56 PM.
Powered by vBulletin® Version 4.2.2
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
SEO by vBSEO 3.6.1