570m Overclock

[Zordrat]

i have the GTX 570M Graphics card, and using Svet's vtuner, i increased the voltage to 0.9v. After doing that I can OC the to 825/1700 @ 70ish degrees C and Stable. If i go above 825/1700, i start to see artifacts. I tested the OC in Crysis 2. I let it run at 825/1700 for a couple hours and it never crashed. Seems like a sweet spot.

Also, what is nice about svet vtuner is that you can adjust the voltage, gpu and memory for just when you have MSI's turbo fuction on. This is nice because you no longer have to install additional software to change the Overclock settings. Also, the memory only overclocks with the turbo function on. However, this is not the case If you just use Nvidia Performance without modifying the firmware, as the memory clock speed will stay at the custom speed regardless of whether or not the turbo function is enabled.

[aazforum]

hello
i want overclock my msu gt780dx gtx570m
ealy i do it
but now my overclock program cant change default settings
plz help me

msi gt780dx with gtx570m
w7 x64
videodriver 285.62
i try use
msi afterburner 2.2.3
RivaTuner
Imageshack - msiafterburner223.jpg

can u take link on version driver and program for tweak?
or any idea?

p.s sry for my bad english

[Tim4]

Press P1(turbo) button first and try to overclock. That should do for you.

[alkado]

aazforum,
чел все очень просто либо морочься с Turbo кнопкой и потом разгоняй,
либо с помощью тулзы nvidiaInspector разлочь турбо вообще.
В наших MSI буках максимальный PState 0 залочен...
при нажатии кнопки турбо он как раз и включается.
Разгонные тулзы правят частоты только в Pstate 0

И того решение:
nvidiaInspector.exe -setPStateLimit:0,0
потом гони.

ели нужно все вернуть в обратку:
nvidiaInspector.exe -setPStateLimit:0,1

Удачи Собрат =)

To english readers:
If you dont want installing MSI software for turbo buttons,
simply use nvidiaInspector to unlock max PState (0) for you card,
its can be easy done by: nvidiaInspector.exe -setPStateLimit:0,0

if you want revert to previos lock state (max PState 1):
nvidiaInspector.exe -setPStateLimit:0,1

Of course, after reboot you need repeat unlocking step

[haniunited]

Thank you, good information.