I am 99% sure your heatsink will be ok. For more info and pictures about the inside of the R4 go to that post (is one of mine :vbthumbsup:). If...
@midnit Just a short advice first: if you want to have the people going quick to the point with your questions consider to add a signature that...
Hi @sC_b4n3 For your case you will need a modded driver (I am now moved to 352.84 modded and it is quite fine with my 970M). Best is to redirect...
If you go for the 680M I thought you can keep the 3D feature. Not for any other more recent nVidia GPU however. For 3D on external display I have...
You can easily verify this in launching an ePSA check (see here how to do it). For your question about W10 you can have a look here (ok I know...
I plus this one Micky. I have been recently victim of not one but two in a row GPU failures so sadly it sounds the most likely cause of your...
Not mine God. I had quite an extensive test of many drivers (at least 4 / 5) modded for most of them so I got my heavy burden of drivers failures...
First question is: are you 60Hz or 120Hz LCD ? If you are 60Hz, look at this excellent thread of woodzstack. Regarding to the risk of bricking...
As far as I know it is not possible mate. 980 needs UEFI. Your work around is to go to Win 8.1. Why do you want to go back from Win 10 to Win 7 ?...
Like already said you can check the wires. However could be also linked to drivers related issues. I experienced myself (on a M17xR4) some issues...
Part 5: About how to improve and to stabilize the 970M + W10 The status when starting writing this post is : M17xR4 is with a 970 M and a modded...
Read below and also here : then those who want to add their voice / vote / post in order to get decent W10 drivers for the (not so) recent nvidia...
Hi lechonman If I well checked in these files I think the Eurocom drivers are more dedicated to W7 and W8.1 You can try the 352.84 modded driver...
Part 4: Half Success or Half Failure Note: I started here a thread about the consequences of such drivers mess for Alienware and its users....
Separate names with a comma.