There is always the manual method.
The white cable leads to the gps port on the mobo.
The leads from the spare cmos battery are...
I added a bit of double stick to re-arrange the direction.
Check PM just for grins.
Umm yes. :D
Camera Max HD both sound and video are correct.
If ya have a Linux distro, and want to look at yerself...sudo apt-get install cheese...
CF-54 is different from 31/53/30 etc.
All that I have seen of the above have the cable coming from under the edge of the silver cover as this...
Always interested in photos. :bigyes:
You didn't say W10 I hope. I don't DO W10. :)
These bundles are fairly complete.
Use W7 calibrator for TS. Don't add drivers.
At the bottom of...
O.K.....I tried to edit the above so as to not double post.........NBR error..... so here goes....
More pictures. It fell on the floor and disgorged it's innards....might as well take a picture.
That board might fit up in a floppy drive caddy....
IDE-SSD would be an option.
I've tried the aftermarket adapters a couple times. No joy. Better off building it yourself.
In my photos there is...
Here ya go with a CF-29 MK5.
MK1 working very slowly from LiveUSB.
GUVCVIEW installed with package "v4l". Clunky. Maybe cheese works now.
Photos saved in /home/m17/Pictures.
CF-VHD2830 if you can find one. For IDE drive. Correct fit in media bay.
I see 3-4 new ones in U.K.
Built for CF-28, fits 29.
I would edit the above file but I'm scared to. :eek2:
Here's edited version (final?) with little launchy thing. (Slingscold)
Give up? What's that?
MX-17 Horizon is working on CF-U1. 386/PAE.
MX is the only distro that did not require tweaking for GMA. Pear was quick...
Separate names with a comma.