Khenglish
Last Activity:
Aug 18, 2018 at 7:50 PM
Joined:
Apr 4, 2010
Messages:
657
Likes Received:
377
Trophy Points:
76
Media:
2
Location:
Saratoga Springs, NY
Occupation:
Rensselaer Polytechnic Institute

Share This Page

Khenglish

Notebook Evangelist, from Saratoga Springs, NY

Khenglish was last seen:
Aug 18, 2018 at 7:50 PM
    1. asphaltkiller
      asphaltkiller
      hello m8
      My 980M just died
      YOu seems to be an experd on this subject , could you please help me identify the fauly components?

      I have tried to measure resistance of the board but il fluctuates between 4 and 6 ohms, no components seems visually deteriorated but when i plug the card in my laptop is stops functioning right away and the charger led stop ligntning.
      I desesperately need help
    2. DaMafiaGamer
      DaMafiaGamer
      Hi, I wanted your advice on putting this panel: NV184QUM-N21 into an alienware 18. Yes it is a 18.4'' 4k eDP lcd (40 pin) and yes the alienware 18 only has 4 channel lvds. Is there anyway a modified pcb from aliexpress can be used to get a 4k signal from any display connector on the motherboard.
      Only asking you as you got 4k working on a your clevo laptop, you did the impossible literally!
      1. DaMafiaGamer
        DaMafiaGamer
        I'm good with soldering and have nothing to loose so go ahead with some of your ideas.
        May 21, 2018
    3. Lynx2017
      Lynx2017
      hi there someone told me you might be able to fix my laptop? I got some liquid metal under the GPU, shorted it out. I blew some of the liquid metal out, but my vaccuum wasn't all that powered. well if you are up for it let me know. if not that is fine too, I gave up on it :)
      1. Khenglish
        Khenglish
        Have you tried a can of compressed air? That would blow some of it further inward, but it may break the short that's preventing it from working.

        What's the GPU btw?
        Apr 19, 2018
      2. Lynx2017
        Lynx2017
        GTX 1070, and I did not try blowing it in towards the GPU, I did blow some out though and got it out... hmm, maybe I will buy a new air can and try blowing it in as you say...
        Apr 19, 2018
      3. Khenglish
        Khenglish
        In is definitely not the greatest and could make things worse, but it should be able to blow harder and hopefully resolve the problem spots.
        Apr 19, 2018
  • Loading...
  • Loading...
  • About

    Location:
    Saratoga Springs, NY
    Occupation:
    Rensselaer Polytechnic Institute

    Signature

    P157SM frame
    P150EM motherboard modded for dGPU eDP
    4K Samsung @ 66Hz
    Clevo GTX 1080
    3920XM forever (looking for good clocking QC22!)
  • Loading...
  • Loading...