I’ll look at it later today and see if it mirrors the same layout as what mine is. Please be aware that I have the advanced model and it’s...
If you can provide me the unmodified version of your bios I can do the edits for the CPU and RAM unlock if you would like. It seems you are not...
Correct sorry I wasn’t clear. Sent from my iPhone using Tapatalk
Blade 17 the Blade 15 only has 60Hz 4K. Unlike screen shot of 120 Hz. Sent from my iPhone using Tapatalk
Bios 1.04 allowed me the constant 100W power draw while out of the freezer with synapse high performance mode.
I’m confused as to the question... it is being forced to always stay around 90W software is preventing it from going higher so it can only go as...
I’m not exactly sure you understand the implications of sensors etc. I’m using about 120W to 130W TDP but depending on the load, cores, memory...
Now we may get an update fixing the hardware flashing issue in the future but not right now :(. Sent from my iPhone using Tapatalk
No you cannot flash anything above 900 series with a modified vbios with this editor. You have to use a hardware flasher. Also when using a...
That is an uneducated answer... performance limit power means you are hitting the specified tdp... power is never unlimited if it were a GPU would...
You don’t want to go above 3000MHz in most laptops. Above those levels you will have compatibility problems with some kits. Sent from my iPhone...
Even when using the performance preset in synapse? If that is so I would try 1.04.
Usually it will hang and once you restart you will indeed be on the updated bios and then you will need to do the power limit modification again....
Never mind if you are on higher than 1.04 then you should be okay I just knew that when I was on 1.02 it wouldn’t work... Also I’m referring to...
Youve got to use the main board bios 1.04 and run in high performance mode to use the 100W portion of the vbios.
Separate names with a comma.
