To new by a generation max I can use is 680m's
Hey there looking to buy a Clevo X7200 500 series GPU Heatink/GPU Fan/GPU SLI Cable for my X7200. If anyone out there maybe have one I am...
In my experience with the r1/r2 m17x I've had similar issues as you with no powers in the past and i went as far as ordering multiple...
Knowing at this point that possibly the EC is bad are you located in the states? If so could I ship you my board and pay you to repair it?
ite IT8512E 1023-NXS DE3LQC L is the number/part number on my EC
The second i plug in the power from the wall into the bare motherboard the 2 lights come on in the front of it the power led flashes green twice...
That is the first thing I thought as well that it looks a bit odd but I have owned this since new.
Just plugged it in and also as you said to feel the EC. The EC does warm up it is not scalding but it gets hot for sure. I can hold my finger on...
I also found this when removing the protective cover behind the mxm slot for the primary GPU the same looking brown residue. It actually flakes...
Khenglish does this look normal to you ? This is the solder joints for the dc plug on the laptop and it has this brown residue maybe flux?[ATTACH]
Only after the battery has been plugged in and or ac power. I just took the entire laptop apart and this is what i Have just found. This looks...
the only thing I removed to do this job was the gpu fan, heatsink, and gpu. Swapped in the new one with fresh paste and thermal pads turned it on...
Yes I tried my supplies from my MSI GT 75 Titan still the same issue.
It does the same blinking code with the AC adapter plugged in battery or no battery.
Separate names with a comma.
