yeah, you're right Raidriar, I'm sorry. how awful, it's like I was thinking out loud. I should also get some sleep, and get over the loss of my...
yes the red image is corrected. So I then successfully installed the M2000M in MXM1 in the R1 with modded driver, now I am swopping out all the...
Thanks, I know the basics, but at premamod i can see no download or example that is for Alienware. I have seen no guide on this that addresses...
Haha, thanks for answering but good grief, have you got an Alienware? have you ever looked for up to date drivers from Dell for anything older...
The generic ribbon cables that I ordered arrived, and they work really well. have a look. they are a tad thinner than the originals but they do...
Its a good job if it works. I used duct tape in a similar way at one point too. It took me at least half a dozen attempts to get good at it, and...
photos of my cable repair - plastic makes the connection firm. if clip is missing, if you can find thin enough plastic that is stiff enough,...
apparantly the 880m is a bit prone to overheating anyway, people here dont seem to like them much, lol, and they are conspicously absent from many...
# I cleaned the motherboard and mxm slots with rubbing alcohol, there was no sign of damage, and redid the thermal paste on the funny little cpu...
my laptop was running a bit hot because it had had a bad job done on the thermal paste (before I bought it) I posted that with photos here...
880m SLI >> 880m in Alienware 18 the primary 880m electrically shorts out. the secondary 880m survived, but it wont work in the primary slot,...
hey, yeah, I ordered some similar too (in UK), and I replied to your other post just now. I just re-repaired my cables too, to get a better...
I cut my cable back to where the pins are not broken, then sanded away the plastic from the contact side to reveal a new contact face of shiny...
H How do I work out which section number?
Separate names with a comma.