Quantcast A quick guide to install and tweak Windows 7 after installation of mSATA

Closed Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Notebook Consultant
    Join Date
    Nov 2008
    Posts
    173
    Rep Power
    15

    Default A quick guide to install and tweak Windows 7 after installation of mSATA

    Hi,

    This is not meant for the experts, but probably you know all these already. It is more for newbies like me. This is what I found out what you need to do to install and tweak Windows 7, using a Recovery Discs (not clean installation), after you install a new mSATA into your T420.

    My system: T420, 4178-6VU (i5-2520, NVS 4200M, 500GB 7200rpm HDD, 4GB). I bought a new 4GB RAM and a 40gb Intel 310 mSATA. This is the summary of what I did:

    1) Create Recovery Discs from the laptop (use ThinkVintage program)
    2) Remove the HDD from the laptop (else the Recovery Discs will again install W7 in your HDD).
    3) Install the Windows 7 (and other programs) using the Recovery Discs.
    4) Put the HDD back to the computer.
    5) Remove the Recovery Discs and restart the computer, follow instructions

    6) Open "Control Panel - Administrative Tools - Computer Management - Storage". Do the following:
    a) delete the partition "Lenovo - Recovery" from the mSATA
    b) extend the memory of the partition C to the maximum
    c) create and format partitions in your original HDD

    7) Uninstall programs that you don't need. Uninstall Windows components that you don't need.
    8) Move temporary folders (users) to the HDD (eg D Drive or RAMDisk) following the instructions in (a) or (b):
    ** Caution, for (a), you might have trouble log into Windows if you ever removed your HDD. http://forum.notebookreview.com/leno...oving-hdd.html

    (a) How to: Setup SSD boot drive with secondary Hard disc optimization - Overclock.net - Overclocking.net

    (b) You can either choose to put some temporary files in RAMDisk, or HDD. We won't move the whole users to the new drive though. To install RAMDisk, use this program:
    http://memory.dataram.com/products-a...wnload-ramdisk
    Then, change the location of the IE and windows to the RAMdisk (X) following the steps;
    i) Internet Option - Browsing History Settings - Move Folder
    ii) My Computer (right click) - Properties - Advanced System Settings - Advanced - Environment Variables
    Change to X:\\AppData\Local\Temp

    9) Do the tweaks (choose the necessary ones) below:
    The SSD Optimization Guide | The SSD Review
    (I skipped #6 (only disable paging in SSD, but enable it in HDD), #9, #10 (Disable Windows Search only), #13, #14, #15, #16,#18)

    These sites might also be useful...
    http://www.mydellmini.com/forum/wind...ed-tweaks.html
    TweakTown’s Solid State Drive Optimization Guide - Windows 7 Optimizations :: TweakTown USA Edition

    10) Do Windows Experience Index. If your system is similar to mine, you should get (something close to)
    Processor: 7.1
    Memory: 7.5
    Graphics: 5.9
    Gaming Graphics: 6.3
    Primary Hard Disk: 7.6

    11) Do updates, install other programs, etc

    Hope this help...

    Yee Kan
    Last edited by kohyeekan; 11th May 2011 at 05:58 AM.
    Lenovo ThinkPads T420; 41786VU; i5-2520; NVS 4200M; 8GB; 40GB Intel 310 mSATA; 500GB 7200rpm
    Sony Vaio FW290; P8400; ATI 3650 512MB; 3GB PC2-6400; 250GB 5400rpm; Blu-ray

  2. #2
    Notebook Consultant
    Join Date
    Jan 2005
    Posts
    276
    Rep Power
    25

    Default Re: A quick guide to install and tweak Windows 7 after installation of mSATA

    Thanks for this! I don't have yet an mSata drive but I may consider one for my next X220 purchase. However one thing I don't really get is why put temporary files (or web browser history etc) on the HDD. I understand this would kind of make the SSD more "durable" but on the other hand you'll probably make the HDD wear faster by constant spin-up and down (unless you stop HDD spin down). On a laptop you'd prefer stop the HDD from spinning while on battery but putting temp files on it would probably (I guess) cause trouble in this respect...

    I mean is the "SSD weardown" due to copying/erasing things on it really an issue or is this just hype? Personally I'd still prefer a full SSD option than mSata+HDD. What do you think?

  3. #3
    Notebook Enthusiast
    Join Date
    Dec 2009
    Posts
    21
    Rep Power
    12

    Default Re: A quick guide to install and tweak Windows 7 after installation of mSATA

    thanks for the detail outline on how to add an mSATA drive. Can you explain how to delete the "lenovo- recovery" partition and how to extend the partition on the mSATA drive? If I did not format the normal Hard drive and keep the OS there as a backup if the mSATA dead, will it be fine? Thanks for any help. Edward

  4. #4
    Notebook Evangelist
    Join Date
    Jun 2006
    Posts
    313
    Rep Power
    22

    Default Re: A quick guide to install and tweak Windows 7 after installation of mSATA

    I wouldn't move the temp folder to the mechanical drive. That'll defeat the purpose of using a speedy ssd. Besides, I would want my hdd to stay spined down as much as possible.

    One reason moving cache directory is to prevent wear on ssd, but the more important reason was because they had shiitty ssd's in the old days which caused horrible stutters on small random writes. Intel ssd's will not stutter, so you are better off just keeping the cache directory where it is. Also, there is trim support, so small writes will not cause much negative on the performance aspect.

    If you have 8GB RAM, I would even further suggest to leave the superfetch enabled. RAM is much faster than the fastest ssd.

  5. #5
    Notebook Consultant
    Join Date
    Nov 2008
    Posts
    173
    Rep Power
    15

    Default Re: A quick guide to install and tweak Windows 7 after installation of mSATA

    The reason to put temporary file on HDD is that HDD write is faster... However, I am not sure whether it is the right thing to do, because I have this problem:

    http://forum.notebookreview.com/leno...oving-hdd.html

    And edwardlican, I think it is should be fine to leave the normal HDD not formatted as backup. I will see whether it works...
    Lenovo ThinkPads T420; 41786VU; i5-2520; NVS 4200M; 8GB; 40GB Intel 310 mSATA; 500GB 7200rpm
    Sony Vaio FW290; P8400; ATI 3650 512MB; 3GB PC2-6400; 250GB 5400rpm; Blu-ray

  6. #6
    Notebook Consultant
    Join Date
    Nov 2008
    Posts
    173
    Rep Power
    15

    Default Re: A quick guide to install and tweak Windows 7 after installation of mSATA

    edwardlican,

    To delete Lenovo_Recovery, under "computer Management", right click the drive, choose "Delete Volume". Then, right click C:, choose "Extend Volume".
    Lenovo ThinkPads T420; 41786VU; i5-2520; NVS 4200M; 8GB; 40GB Intel 310 mSATA; 500GB 7200rpm
    Sony Vaio FW290; P8400; ATI 3650 512MB; 3GB PC2-6400; 250GB 5400rpm; Blu-ray

  7. #7
    Notebook Consultant
    Join Date
    Jan 2005
    Posts
    276
    Rep Power
    25

    Default Re: A quick guide to install and tweak Windows 7 after installation of mSATA

    Quote Originally Posted by hp79 View Post
    If you have 8GB RAM, I would even further suggest to leave the superfetch enabled.
    How would you do that?

  8. #8
    Notebook Deity
    Join Date
    Jun 2008
    Posts
    1,144
    Rep Power
    20

    Default Re: A quick guide to install and tweak Windows 7 after installation of mSATA

    A lot of these tips will make a long time SSD user shakes their head. First of all, superfetch should be disabled, even Intel SSD tool suggests you do this. Second, moving temp files to the normal HDD is a very bad idea, as it is horribly slow. Third, SSD life time for around 10GB of writing a day is around 10 years. I'm pretty sure you don't keep old hardware for that long.
    And these are just barely scratching the surface of SSD optimization.
    T440s: i5-4300U/8GB RAM/Intel Graphics/512GB M2 SSD/14" 1080p Touchscreen

  9. #9
    Notebook Consultant
    Join Date
    Nov 2008
    Posts
    173
    Rep Power
    15

    Default Re: A quick guide to install and tweak Windows 7 after installation of mSATA

    Dear All,

    I reinstall the Windows and modified the procedures. Now, it seems working fine...
    Lenovo ThinkPads T420; 41786VU; i5-2520; NVS 4200M; 8GB; 40GB Intel 310 mSATA; 500GB 7200rpm
    Sony Vaio FW290; P8400; ATI 3650 512MB; 3GB PC2-6400; 250GB 5400rpm; Blu-ray

  10. #10
    Notebook Enthusiast
    Join Date
    Dec 2009
    Posts
    21
    Rep Power
    12

    Default Re: A quick guide to install and tweak Windows 7 after installation of mSATA

    Quote Originally Posted by kohyeekan View Post
    Dear All,

    I reinstall the Windows and modified the procedures. Now, it seems working fine...
    Thank you so much ! That is a very good start for all the people who want to install the SMATA dirve themselves. Thanks again.

 

 
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT -4. The time now is 08:24 PM.
Powered by vBulletin® Version 4.2.2
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
SEO by vBSEO 3.6.1