Quantcast Hp compaq nx 9020 dead

Closed Thread
Results 1 to 3 of 3
  1. #1
    Newbie
    Join Date
    Mar 2009
    Posts
    5
    Rep Power
    14

    Default Hp compaq nx 9020 dead

    Hi. I have a Hp compaq nx 9020 notebook. from the last week she is dead. The processor and ram,hdd are ok. The charching light and other lights are dead and the motherboard did not start up. Have any one a idee what can i do. I need a motherboard schematic because i have opened up the notebook and did not find any blowing pieces. I have downloaded the service manual for this model and the schematics are not in there. Please help me !!!

  2. #2
    Notebook Evangelist
    Join Date
    Oct 2007
    Posts
    511
    Rep Power
    19

    Default Re: Hp compaq nx 9020 dead

    Make sure all the parts (RAM, HDD, mini PCI cards, modem cards, etc.) are properly seated or connected.

    Have you checked that the charger is working?

    Try starting with battery alone / charger alone in case the problem is one of these.

    Try removing the charger and battery, hold down the power button for half a minute or so, reconnect power and try starting again.

    If none of this works, your motherboard is probably fried and you're probably best off to buy a new laptop and sell your old one for parts on ebay.

    Unless you had some catastrophic failure, you won't find any blown up pieces on the motherboard. Most likely you've got a blown fuse so try checking all the fuses on the motherboard with an ohmmeter. A schematic would be handy but you could just examine the motherboard closely. You're looking for surface mount fuses, which look like tiny rectangular blocks about the size of a grain of rice.

  3. #3
    Newbie
    Join Date
    Mar 2009
    Posts
    5
    Rep Power
    14

    Default Re: Hp compaq nx 9020 dead

    All components are checked and tested the notebook motherboard must start without hdd and pci. But problem is from the motherboard it is not loading and no power up. The charger are new and i have tested it with mi multimeter. I have checked ale fuses and i have checked so any other pieces but I dont now what voltage must be in there so I need a motherboard schematics(PCB). When i have that schematic it is more easyer to check all pieces from the site with the power surce. Thanks for you answer and sorry for my ENGLISH

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT -4. The time now is 04:47 AM.
Powered by vBulletin® Version 4.2.2
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
SEO by vBSEO 3.6.1