Undervolting Penryn?

[mahmood]

I have also a T9300. Every time I try to enter the submenu of "profiles", as you can see the CPU stuck at 100% and I can not do anything with RM.

What is the problem?

[flipfire]

Follow my guide on my sig. I dont think your CPU was detected properly

[mahmood]

cpu-Z detect my T9300 as penryn but rightmark detect it as wolfdale!!

[cwis]

I have a T8300 and i undervolted my 12X to 0.95V with no problems so far
Just a quick question, how do you lower the lowest selectable voltage? Mine is capped at 0.925V....thanks!

[flipfire]

you cant. 6x multiplier is the idle voltage, this is locked in on purpose


Is 0.925v for superLFM aswell?

[cwis]

yes it is~

am I the only one on this thread with T8300?

although I can undervolt to a lower voltage than non-penryns...the changes in temperature aren't as drastic as far as I can see, since it started at a lower temp already

[flipfire]

how low temps are we talking about?

results can vary.

You should be getting idle temps of around 40c and max temps of 65c ish

[cwis]

right on! According to HWmonitor, I'm getting lows of 40c and max of 66c
rmclock usually has the temps 4-5c lower

just a quick question, does having a more powerful gfx card affect the cpu temp? I have a Geforce 8600m GT DDR3 256mb and its max temp is ~74c

[flipfire]

yes, as they share the same heatsink but its not significant change

[pezzodicento]

right on! According to HWmonitor, I'm getting lows of 40c and max of 66c
rmclock usually has the temps 4-5c lower

just a quick question, does having a more powerful gfx card affect the cpu temp? I have a Geforce 8600m GT DDR3 256mb and its max temp is ~74c

I've got a T8300 as well. My max is 66
My 'idle' is 50 though!
How is everybody getting such low idle temps?
Mine barely goes down to the SLF 600Mhz most of the time.

I've tried turning off all the unnecassary processes, but still getting 49 idle.
Or do you guys have the 9 cell battery giving more airflow?