Quantcast HP 8710W F.20 Bios Downgrade

+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    Newbie
    Join Date
    Jun 2012
    Posts
    2
    Rep Power
    0

    Default HP 8710W F.20 Bios Downgrade

    Hi

    The (F.20) and continuous operation of the fan causes the preceding versions of the BIOS. I want to return to the old bios version, but does not allow this.

    Can you help me to downgrade the bios?

    Thanks

  2. #2
    Notebook Evangelist
    Join Date
    Nov 2011
    Posts
    626
    Rep Power
    6

    Default Re: HP 8710W F.20 Bios Downgrade

    Quote Originally Posted by melo12 View Post
    Hi

    The (F.20) and continuous operation of the fan causes the preceding versions of the BIOS. I want to return to the old bios version, but does not allow this.

    Can you help me to downgrade the bios?

    Thanks
    First off are you sure the vents aren't clogged with dust? Continuous fan operations could be attributed to this if you never taken apart and dusted out your laptop or reapplied the thermal paste to insure it still work??? So when was the last time you did these two things??
    Last edited by StormJumper; 10th June 2012 at 09:44 AM. Reason: revise

  3. #3
    Newbie
    Join Date
    Jun 2012
    Posts
    2
    Rep Power
    0

    Default Re: HP 8710W F.20 Bios Downgrade

    This has become the device after bios upgrade. Motherboard, cpu and fan, unfortunately did not resolve the problem changed. When you are probably going to be okay Downgrade

  4. #4
    Banned
    Join Date
    Dec 2008
    Location
    YellowBrickRd.AU
    Posts
    7,931
    Rep Power
    0

    Default Re: HP 8710W F.20 Bios Downgrade

    Quote Originally Posted by melo12 View Post
    Hi

    The (F.20) and continuous operation of the fan causes the preceding versions of the BIOS. I want to return to the old bios version, but does not allow this.

    Can you help me to downgrade the bios?

    Thanks
    Once you flash F.20 onto your system you cannot flash back to an older version. This detail is included in the instructions that come with F.20.

    So the way to get back would be either:

    1. Ask HP for a systemboard replacement if you are still under warranty.

    2. Physically remove the flash eprom and solder on a programmed one with an older bios than F.20. Unfortunately Grains BIOS repair do not offer a pre-programmed 8510W chip so would need to find some other way of copying a pre-F.20 chip onto an eprom chip for soldering onto your system.

    Can thank HP for deliberately doing this to prevent users enjoying the benefits that modified bios brings without needing to upgrade their system. Ie: dual-IDA, no whitelist, SLIC 2.1.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT -4. The time now is 01:47 PM.
Powered by vBulletin® Version 4.2.0
Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.
SEO by vBSEO 3.6.0