680m only 68% load in assassins creed revelations help

[MicSpeed]

I have a p170em with 680m and 3820qm cpu and i my gpu only gets 68% load in assassins creed revelations. The game's graphics is on max settings, and it gets as low as 33 fps, average on 50. As i said with only 68% gpu load. Anyone have played this game with this gpu? Do you get the same results? Drivers? I have installed 304.79.

[amirfoox]

I'm about to have a very similar specs as you do (except I opted for the 3610QM, instead) from the exact same place as you did - Schenker. I hope you'll be able to get it sorted out soon...

By the way, have you tried setting the game profile to max performance in the nVIDIA driver settings?

[MicSpeed]

I'm about to have a very similar specs as you do (except I opted for the 3610QM, instead) from the exact same place as you did - Schenker. I hope you'll be able to get it sorted out soon...

By the way, have you tried setting the game profile to max performance in the nVIDIA driver settings?

Yes i did it...
By the way AC Brotherhood runs without problems - 99% gpu load.
I dont know why this is happening in revelations.
Even with OC to 854/2300 fps rises 4-5 fps but gpu load continues 68/70%

[Killerinstinct]

What settings are you using , post a screenshot of the settings tab ingame

[Arestavo]

Sounds like a driver issue. You could try grabbing the latest from LaptopVideo2Go Community to see if that ups the usage. Other than that, you'll have to try different drivers or wait for a new release to fix this issue.

[fenryr423]

check to see if you have vsync on... that sounds like vsync paired with triple buffering to me

[MicSpeed]

Prints below


Fps runs within 30-80 so i dont think that there is a vsync problem.

[Meaker]

I think this is a known game issue. Bad port basically.

[DarkSiren]

I think this is a known game issue. Bad port basically.

I agree. Sounds like a game limitation to me.

Depends on how good the coding is. I've played Witch 2 with max settings on 30fps but on,y 60% utilisation.

[thief1958]

How about on other games when it comes to GPU load? ..Ideally, 99%-97% has to be reached by the GPU for full maximization, and on a certain ideal temp. range.

I am currently burning my 680M with Crysis 2 on DX 11, High Res Text. Pack at Extreme setting, 1080p. The temp. reading/s are shocking :-) I'm playing D3 also with V-sync. And yes both are at 99-97% GPU load. I'm OC'ing at stock volt. (.9870 V).