found this thread as being most thorough on FS Sa3650 and decided to post my query hereby.
Just recently bought a FS Sa3650 with graphicbooster, installed win7 RC and latest Catalyst drivers (9.7) on it. Got it connected over the HDMI on graphicbooster to my external HP2309m monitor.
Somehow I managed to force the resolution on external monitor to be over it's specs so now all i have on external monitor screen is "signal out of range - adjust settings to 1960x1080/60Hz".
Unfortunately, I also did designate the external monitor as primary display and the only one showing picture. So currently I have external monitor displaying the above described error message and laptop screen being blank.
I have re-installed the catalyst 9.7 (with prior cleaning all ATI soft from computer with Guru3D driversweeper), still the same problem.
Any advice there how to set the resolution back to the one which is acceptable by monitor?
Any advice is higly appreciated.
PS. When I connect the ext monitor via graphicbooster on DVI it works fine but I still cannot see the way how to set the settings for HDMI connection there
Recently I bought the sa 3650 + graphicbooster, but I have encountered some problems. The graphicbooster overheats, the fan is not running at all and when I play games, it runs for 1-2 min. then the booster shuts down.
I think the fan in the booster is defect, since I have never heard the fan running and it overheats.
When in a game there's a beeping noise from the booster but the fan is still not running.
The booster works when surfing the internet or writing in word (light tasks)
I have upgraded all drivers, bios etc. still no succes...
Can some of you guys tell me if the fan is noticeable when running?
Have any of you encountered a similar problem?
Just bought this laptop, i tried to install Seven RC on it, but impossible for me to enable xgp on internal screen. I read that someone could. Maybe this one one should indicate a good procedure, even if ATi drivers are for ever so poor.
Hi i am running the amilo sa 3650 on windows 7 ultimate 32bit. Does anyone where i can find the keyboard drivers? I cant control my brightness(fn+f8/9) and more important, i cant control both of the silent mode buttons (fn+f11, button top right). Would be nice if anyone could help me find them. I deleted my recovery partition :/
Would be awesome to get at least the silent mode working...