+ Reply to Thread
Results 6,741 to 6,750 of 11665
Thread: DIY eGPU experiences
-
17th November 2011, 09:12 AM #6741Notebook Enthusiast
- Join Date
- Nov 2011
- Location
- Russia, Voronezh
- Posts
- 15
- Rep Power
- 4
Re: DIY eGPU experiences
kizwan,
OK, thank you! I'll write more when I have everything to eGPUAspire 5920G 602G16Mi + T9500@2.8GHz + 8Gb DDR2 + 8600GT@512Mb
-
17th November 2011, 10:06 AM #6742
Re: DIY eGPU experiences
Good luck!
Dell Studio 1557 | Intel Core i7-720QM - CPU Microcode Update Rev 4 | 4GB | dGPU: ATI Mobility Radeon HD 4570 + eGPU: PowerColor HD 5870
Asus A42JV/K42JV | Intel Core i5-450M | 4GB DDR3 1066MHz | nVidia GeForce GT 335M 1GB DDR3 with Optimus technology | WLED 1366x768 14"
Phoenix BIOS MOD Request | Acer Notebook Clock Generators/PLL | Guide to BIOS mod for Dual-IDA
-
17th November 2011, 12:50 PM #6743
Re: DIY eGPU experiences
Should the V2 of PE4L perform better than the normal? I thought the V1 was pcie2.0 capeable?
ThinkPad W520 4282W16
2720QM /2 x4 Gb ram / Quadro 1000M / 128GB Crucial M4 + 500Gb Hdd / FHD Screen + X-Rite® color calibration sensor / Intel WiFi Link 6300 AGN WLAN / 9 Cell Battery
-
17th November 2011, 01:11 PM #6744Notebook Enthusiast
- Join Date
- Nov 2011
- Posts
- 35
- Rep Power
- 4
Re: DIY eGPU experiences
I had a quick question. So I'm waiting for my x3 mPCIe cards to do my x4 setup. I was able to get my x1 working with no errors, so should I foresee any problems getting the rest going if x1 is working fine? Can't wait to get it all setup.
I was also curious but when i had my x1 HD4850 going flash was giving my errors in Firefox and Chrome. I'm using the latest DNA driver. When I went back to my iGPU it was working fine.Last edited by Derbish; 28th November 2011 at 04:17 PM.
-
17th November 2011, 01:16 PM #6745Notebook Enthusiast
- Join Date
- Nov 2011
- Location
- Russia, Voronezh
- Posts
- 15
- Rep Power
- 4
Re: DIY eGPU experiences
I have bad news. I learned that the Intel Turbo Memory (ITM) has a different pinout, which does not coincide with the mini-PCIe pinout (mPCIe port #2 is used for ITM and TV-tuner).
I inserted the Wi-Fi adapter in the slot for ITM (mPCIe port #2), and Wi-Fi card is burned!
But ITM normally works in mini-PCIe slot for Wi-Fi (mPCIe port #4). I think that the Acer 5920G is not possible to get a x2 link. I think it is necessary to remove such information from the first post.
This explains the failure of user antichamp (link)Aspire 5920G 602G16Mi + T9500@2.8GHz + 8Gb DDR2 + 8600GT@512Mb
-
17th November 2011, 01:50 PM #6746
Re: DIY eGPU experiences
Can I get the link to where you got the information that ITM have different pinout? As far as I know it is mPCIe card & connect to mPCIe port. I can't find any info to suggest otherwise. Also 5920G schematic show it's PCIe lane. antichamp's post didn't mention it have the same problem, only unable to get x2 working. According to antichamp's previous post, connecting WIFI to PCIe port#2 doesn't caused any problem, in fact WIFI is detected. Also, the picture show that PCIe port#2 & port#4 doesn't show up if no device connected to them. This means using the mPCIe port for eGPU will be tricky. Setup 1.x anti-whitelist should be able to make eGPU to work with mPCIe port on this notebook.
BTW, ExpressCard is PCIe port#1 based on the information here & here.Last edited by kizwan; 17th November 2011 at 02:09 PM.
Dell Studio 1557 | Intel Core i7-720QM - CPU Microcode Update Rev 4 | 4GB | dGPU: ATI Mobility Radeon HD 4570 + eGPU: PowerColor HD 5870
Asus A42JV/K42JV | Intel Core i5-450M | 4GB DDR3 1066MHz | nVidia GeForce GT 335M 1GB DDR3 with Optimus technology | WLED 1366x768 14"
Phoenix BIOS MOD Request | Acer Notebook Clock Generators/PLL | Guide to BIOS mod for Dual-IDA
-
17th November 2011, 02:06 PM #6747Notebook Enthusiast
- Join Date
- Nov 2011
- Location
- Russia, Voronezh
- Posts
- 15
- Rep Power
- 4
Re: DIY eGPU experiences
I can not give a link because it was found out during our correspondence in Russian Acer-fans forum, it's all written in Russian. I have wi-fi card is detected, but after 5-7 minutes the laptop was freezed and no longer start with Wi-Fi card. Without it - normally starts.
I will check the mPCIe port #2 when I get PE4H... But I think it will feilAspire 5920G 602G16Mi + T9500@2.8GHz + 8Gb DDR2 + 8600GT@512Mb
-
17th November 2011, 02:18 PM #6748
Re: DIY eGPU experiences
Using eGPU with mPCIe port on your notebook will be a bit tricky (I edited my previous post ^^) but Setup 1.x should be able to get it to work.
Dell Studio 1557 | Intel Core i7-720QM - CPU Microcode Update Rev 4 | 4GB | dGPU: ATI Mobility Radeon HD 4570 + eGPU: PowerColor HD 5870
Asus A42JV/K42JV | Intel Core i5-450M | 4GB DDR3 1066MHz | nVidia GeForce GT 335M 1GB DDR3 with Optimus technology | WLED 1366x768 14"
Phoenix BIOS MOD Request | Acer Notebook Clock Generators/PLL | Guide to BIOS mod for Dual-IDA
-
17th November 2011, 02:35 PM #6749Notebook Enthusiast
- Join Date
- Nov 2011
- Location
- Russia, Voronezh
- Posts
- 15
- Rep Power
- 4
Re: DIY eGPU experiences
Ok, you reassured me

I will try ...Aspire 5920G 602G16Mi + T9500@2.8GHz + 8Gb DDR2 + 8600GT@512Mb
-
17th November 2011, 02:48 PM #6750
Re: DIY eGPU experiences
If you put back the Intel Turbo Memory to PCIe port#2, does it detected in AIDA64? Also, if you put back WIFI card to PCIe port#4, does it work again? If Intel Turbo Memory is not detected anymore, I'm afraid PCIe port#2 is burned.
Dell Studio 1557 | Intel Core i7-720QM - CPU Microcode Update Rev 4 | 4GB | dGPU: ATI Mobility Radeon HD 4570 + eGPU: PowerColor HD 5870
Asus A42JV/K42JV | Intel Core i5-450M | 4GB DDR3 1066MHz | nVidia GeForce GT 335M 1GB DDR3 with Optimus technology | WLED 1366x768 14"
Phoenix BIOS MOD Request | Acer Notebook Clock Generators/PLL | Guide to BIOS mod for Dual-IDA



18Likes
LinkBack URL




Reply With Quote



I`m upgrading, are you? (GTX 780M...
Today, 01:34 PM in Gaming (Software and Graphics Cards)