Quantcast Can't Get Windows to Use mSATA for Boot Partition on M4600?

+ Reply to Thread
Page 1 of 3 123 LastLast
Results 1 to 10 of 23
  1. #1
    Notebook Enthusiast
    Join Date
    Jul 2011
    Posts
    33
    Rep Power
    9

    Default Can't Get Windows to Use mSATA for Boot Partition on M4600?

    I've got an m4600 with a 128GB mSATA SSD and a 750 GB HDD.

    I'm doing a fresh install of Windows 7.

    With both disks wiped (no existing partitions), I select disk 0 (the mSATA SSD) to install Windows on and hit next. It continues happily along, but when it completes I find it created a 100 MB system partition (the boot partition) on disk 1 (the HDD) and installed all the rest of Windows on a partition it created the mSATA SSD. So it's actually booting from the HDD and then loading all the rest of Windows from the mSATA.

    If I try manually creating a partition in the Windows install on disk 0, it creates one partition using all the space. If I create a partition on disk 1, it puts up a dialog about creating additional partitions, and then creates two -- a 100 MB system partition and the other main partition. I want it to do that with disk 0.

    So, Windows is apparently thinking it can't boot from the mSATA SSD. Which is weird because that's the way it was set up from the factory (the mSATA had the boot partition on it as well). But I can't find a way to get that back.

    I've checked to make sure the mSATA device is set to bootable in the BIOS (although let me know if there is a trick to this). When I set the system to only boot from the mSATA, it hangs on boot up. If I set it to boot from the HDD, it boots up fine.

    I thought maybe it needed some additional drivers to recognize the mSATA as a boot device, so I've tried using the drivers during the install from the "Rapid Storage Technology (Pre-OS Install)", but when I do that Windows install now says it can't install on either of the two drives (showing a generic hex code error message), and I have to re-start the install.

    Any ideas or help? I tried talking to Dell tech support, but the person on the phone had no clue and was just walking me through these long, drawn out steps that they were just reading off the screen. I suspect there is some more direct answer to this.

    Many thanks in advance!
    Last edited by Zzyzxtek; 7th August 2011 at 04:59 PM.

  2. #2
    Notebook Deity
    Join Date
    Jun 2007
    Posts
    836
    Rep Power
    21

    Default Re: Can't Get Windows to Use mSATA for Boot Partition on M4600?

    Remove the hard drive and then install as per normal
    Dell Precision M4600.
    Dell Precision M3800

  3. #3
    Notebook Consultant
    Join Date
    Oct 2008
    Location
    Valdosta, Georgia
    Posts
    150
    Rep Power
    15

    Default Re: Can't Get Windows to Use mSATA for Boot Partition on M4600?

    Quote Originally Posted by Weegie View Post
    Remove the hard drive and then install as per normal
    I don't think the mSata drive works without a HDD or something (another SSD) in the normal drive location. I tried doing that before with my m4500 and it didn't work.
    Dell Precision M4700: i7-3840QM | 16GB | 750GB SSD | 256GB SSD mSATA | Intel 4000HD + Nvidia K2000M | WLED FHD | Intel 6300 | Dell 380 BT | Backlit KB
    Dell Precision M4600: i7-2860QM | 16GB | 250GB SSD | 80GB SSD mSATA | Intel 3000HD + Nvidia 2000M | WLED FHD | Intel 6300 | Dell 375 BT | Backlit KB

  4. #4
    Notebook Deity
    Join Date
    Jun 2007
    Posts
    836
    Rep Power
    21

    Default Re: Can't Get Windows to Use mSATA for Boot Partition on M4600?

    Worked with my intel 310 Tom, as long as the bios is set correctly, mSata formatted and set to basic disc, trying to clean install mine with the HDD in it, ended up with a mess like the OP just stated, bit of this here...and a bit that there.
    Soon as you put the hard drive back in after installing windows on the mSata, or any new HDD in the main slot, you have to reset the bios to primary boot from the mSata, because the silly thing defaults back to the HDD again, even if there is no OS on it, thus ending in not being able to find any bootable device
    Dell Precision M4600.
    Dell Precision M3800

  5. #5
    Notebook Enthusiast
    Join Date
    Jul 2011
    Posts
    33
    Rep Power
    9

    Default Re: Can't Get Windows to Use mSATA for Boot Partition on M4600?

    Thanks for that report! I just spent the entire afternoon installing all the Dell drivers and utilities per the re-image guide and Windows update, etc. So I was hoping for some confirmation that a clean Win 7 install could be made with the HDD temporarily removed before I backtracked that much. Now that I know it's possible, I probably won't be satisfied until I wipe it all out and try it!


    Quote Originally Posted by Weegie View Post
    Worked with my intel 310 Tom, as long as the bios is set correctly, mSata formatted and set to basic disc, trying to clean install mine with the HDD in it, ended up with a mess like the OP just stated, bit of this here...and a bit that there.
    Soon as you put the hard drive back in after installing windows on the mSata, or any new HDD in the main slot, you have to reset the bios to primary boot from the mSata, because the silly thing defaults back to the HDD again, even if there is no OS on it, thus ending in not being able to find any bootable device

  6. #6
    Notebook Deity
    Join Date
    Nov 2009
    Posts
    1,565
    Rep Power
    20

    Default Re: Can't Get Windows to Use mSATA for Boot Partition on M4600?

    Quote Originally Posted by Zzyzxtek View Post
    Thanks for that report! I just spent the entire afternoon installing all the Dell drivers and utilities per the re-image guide and Windows update, etc. So I was hoping for some confirmation that a clean Win 7 install could be made with the HDD temporarily removed before I backtracked that much. Now that I know it's possible, I probably won't be satisfied until I wipe it all out and try it!
    You have to move the drive up in the boot sequence. The bios automatically puts the 2.5" drives ahead of it.
    M6700 - i7-3920XM / Nvidia K5000M / IPS
    M6600 - i7-2720QM / Quadro 5010M / IPS

  7. #7
    Notebook Enthusiast
    Join Date
    Jul 2011
    Posts
    33
    Rep Power
    9

    Default Re: Can't Get Windows to Use mSATA for Boot Partition on M4600?

    Quote Originally Posted by Bokeh View Post
    You have to move the drive up in the boot sequence. The bios automatically puts the 2.5" drives ahead of it.
    Yep, thanks. When I was having the issues, the 2.5" drive was unchecked as bootable -- only the mSATA and DVD were checked as bootable, with the DVD first on the list. I had to make the HDD bootable after Windows put the partition on it (as mentioned above).

    I decided to wipe out the disks and re-install with the HDD removed when I get home this evening, so stay tuned...

  8. #8
    Company Representative
    Join Date
    Aug 2008
    Location
    Round Rock, TX
    Posts
    402
    Rep Power
    17

    Default Re: Can't Get Windows to Use mSATA for Boot Partition on M4600?

    If you are having issues installing the OS to the mSATA drive try removing all other HDD's from the system and trying the install again. This will force the OS to install to the mSATA drive and not the HDD's.

  9. #9
    Notebook Enthusiast
    Join Date
    Jul 2011
    Posts
    33
    Rep Power
    9

    Default Re: Can't Get Windows to Use mSATA for Boot Partition on M4600?

    Quote Originally Posted by Zzyzxtek View Post
    I decided to wipe out the disks and re-install with the HDD removed when I get home this evening, so stay tuned...
    Worked like a charm!

    I wiped both disks (I had time, so I truly wiped them with a utility that wrote 0's over the entire disk overnight -- probably not necessary, but I wasn't taking any chances with left over boot sectors or anything). Then I removed the HDD, booted to the Windows CD, it saw the mSATA SSD, I selected it and it went ahead and did the install. Put the HDD back, and it boots fine with just the mSATA enabled for boot and the only device in the boot order (also see note below). Checked it and the 100MB "System Reserved" partition was there on the mSATA along with the primary system partition, leaving the HDD completely untouched for my exclusive use.

    Thanks to everyone for the suggestions!

    Now I'm back to installing all the drivers and system software. Hopefully I'll be back to where I was last night before I burn out tonight.

    An interesting side note: With the HDD removed, the BIOS no longer showed the mSATA as a bootable device. It was not possible to enable it or set it in the boot order when it was the only installed disk. Only when I put the HDD back in did it show in the list, and could I mark it as bootable and add it to the boot order. There must be something about having the primary disk installed that enables the mSATA disk?

  10. #10
    Newbie
    Join Date
    Aug 2011
    Posts
    3
    Rep Power
    0

    Default Re: Can't Get Windows to Use mSATA for Boot Partition on M4600?

    Hi. I am having the same problem with my M4500. I've done what you describe, but with different behavior. Here is what I have done:

    1) Installed mSATA Intel 310 80GB
    2) Set BIOS to boot from CD/DVD and mSATA
    3) Set BIOS SATA to AHCI
    4) Booted from install DVD
    5) Used DISKPART CLEAN ALL on existing HDD (disc 0 HDD, disc 1 SSD)
    6) Shutdown and removed HDD, leaving only the SSD
    7) Booted from install DVD
    8) Installed WIN7 to SSD with 100MB System Reserve on SSD
    9) Installed necessary drivers and other Dell schwag
    10) Shutdown and installed HDD
    11) Set BIOS to boot from CD/DVD and mSATA
    12) No Dice on Win7 booting
    13) Tried Startup Repair >3 times per other forum recommendations
    14) Still no luck

    I can boot into Win7 by selecting the mSATA as the boot option from F12 menu. I cannot boot otherwise. I figure the issue is that the SSD was Disk 0 when Win7 was installed w/o the HDD. The SSD becomes Disk 1 with the HDD installed and at Disk 0. I haven't tried setting the BIOS to boot CD/DVD, mSata, and internal HDD (I just saw this posting). I haven't yet tried bootrec /fixmbr or /fixboot.

    What is your boot order in the BIOS? Is your SATA configured for AHCI or RAID? According to "diskpart list disk", is the HDD disk 0 and SSD disk 1, or vice-versa?

    Anybody else have a M4500 with a similar and working configuration? Can you provide BIOS settings and "diskpart list disk" results, including location of system reserve?

    Thanks in advance for your help and advice.

 

 
Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT -4. The time now is 05:09 PM.
Powered by vBulletin® Version 4.2.2
Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.
SEO by vBSEO 3.6.1